Abstract:In this paper, the start microstructure of full martensite and dual phases comprising ferrite and martensite were introduced into quenching and partitioning (Q&P) steel to tailor the microstructural characteristics and mechanical behaviors, which was achieved by means of a pre-quenching treatment with various temperatures. It is revealed that the conventional Q&P sample possessed bimodal microstructure with predominantly blocky feature, while gradually changed from combination of blocky and lath structures into individually lath feature in pre-quenched Q&P samples. The reversed austenite presented different variants, which predominantly reproduced the orientation of parent austenite and occasionally possessed twin relationship, low angle misorientation or extraneous with parent austenite. The twin-related austenite included annealing twin and reversed twin, whilst the latter showed twin relationship with both neighbored annealing twin and parent austenite. The variant type of reversed austenite significantly influenced the characteristics of its orientation relationship with neighbored pre-quenched martensite. The pre-quenching treatment was favorable to improve the carbon content of meta-stable austenite before Q&P treatment, while the final carbon content in retained austenite was mainly controlled by the synergistic carbon partitioning of martensite and bainite on basis of thermodynamic calculation, accompanied with the partitioning of Mn and Si elements. Moreover, the pre-quenched martensite deformed coordinately in a unit of martensite packet and was beneficial to retard necking to improve ductility. The optimal mechanical properties were obtained with pre-quenching temperature near Ac 3 , possessing yielding strength of 623 MPa, ultimate tensile strength of 861 MPa and product of strength and elongation exceeding 28 GPa%, attributing to the positive TRIP effect originating from lath-like retained austenite with high carbon content and multi-level hierarchical microstructure inherited from pre-quenched martensite.

Focused Ion Beam-Induced Displacive Phase Transformation From Austenite to Martensite during Fabrication of Quenched and Partitioned Steel Micro-Pillar

Effect of focused ion beam process parameter on Tin-Nickel-Copper micropillars microfabrication

In Situ Observation of Martensitic Phase Transformation in Low Carbon Steel Containing Cu

The Phase and Microstructure Changes in 45# Steel Irradiated by Intense Pulsed Ion Beams

Modified microstructures in proton irradiated dual phase 308L weldment filler material

In-Plane Liftout and Push-to-Pull for In Situ Mechanical Testing of Irradiated Inconel X-750

Evaluating the effects of pillar shape and gallium ion beam damage on the mechanical properties of single crystal aluminum nanopillars

Diffusional and displacive transformations in interstitial-free steel within the scope of a critical assessment of the mechanical property

Experimental and theoretical analysis of multiphase microstructure in a newly designed MnSiCrC quenched and partitioned steel to promote bainitic transformation: The significant impact on mechanical properties

Micro/nano-mechanical behaviors of individual FCC, BCC and FCC/BCC interphase in a high-entropy alloy

Grain refinement and microstructural evolution of grain boundary allotriomorphic ferrite/granular bainite steel after prior austenite deformation

Phase-field simulation and high-temperature confocal laser scanning microscope experimental study of Martensite transformation during the disk laser quenching process

Identification and quantification of martensite in ferritic-austenitic stainless steels and welds

Electron Microscopy Analysis of Deformation Induced Ε Martensite Transformation in an Fe-Mn-Si-Cr-Ni Alloy

Atom-probe tomographic and dilatometric studies of phase-transformations after inter-critical annealing of a low-carbon dual-phase steel

Phase transformation and microstructure evolution of pearlite heat-resistant steel during heating

Insight into austenite reversion and mechanical behavior of quenching and partitioning steel inherited hierarchical structure of martensite

Microstructure evolution in 439 stainless steels under tensile: phase field simulation and experiment

Quasi-Situ Characterization of Retained Austenite Orientation in Quenching and Partitioning Steel via Uniaxial Tensile Tests

Dislocation Activities at the Martensite Phase Transformation Interface in Metastable Austenitic Stainless Steel: An In-situ TEM Study

Carbide-facilitated nanocrystallization of martensitic laths and carbide deformation in AISI 420 stainless steel during laser shock peening