Abstract:As a metallurgical and chemical raw material, electrolytic manganese is an important strategic resource. However, with the rapid development of the electrolytic manganese industry, the correct disposal of anode slime has become a serious problem. The purpose of this experiment was to reduce the occupation of land resources by the lead–containing waste residue of electrolytic manganese, reduce the pollution caused by the lead–containing waste residue to the environment and provide a reference for the research on the treatment technology and resource utilization of lead–containing waste residue in China. In this experiment, a special process was studied for the composition characteristics of lead–containing waste residues produced by electrolytic manganese. The acid leaching–enrichment–membrane electrolysis process was used to recover the lead in the lead–containing waste residues of electrolytic manganese and to recover the acid, so as to maximize the utilization of resources. In this experiment, the pretreated lead–containing waste residue was leached, enriched and concentrated, and then the enriched Pb2+ solution was used as cathode solution and dilute nitric acid as anode solution to recover lead by membrane electrolysis. The membrane electrolysis experiment uses lead plate as cathode, selects the best anion exchange membrane and anodic electrolysis material, and then takes lead recovery, acid recovery, current efficiency, voltage and power consumption as investigation indexes to explore and analyze the influence of many factors such as Pb2+ concentration and current density on the experiment, so as to determine the best membrane electrolysis process parameters. The optimum process parameters of lead recovery by membrane electrolysis were determined as follows: Pb2+ concentration was 40 g/L, current density was 30 mA/cm2, reaction temperature was 60 °C, cathodic pH value was 4.0, anodic HNO3 concentration was 0.5 mol/L, and cathodic ammonium nitrate concentration was 50 g/L. Under the optimal conditions, the current efficiency was 85.6%, the acid recovery was 73.03%, the lead recovery was 99.2%, the voltage was 3.8 V, and the power consumption was 1148.4 kW·h·t−1. Through the three steps of acid leaching–enrichment–membrane electrolysis, 78.53% of the Pb2+ in the original lead–containing waste residue can be recovered in the form of metal lead element, and the HNO3 recovered in the anode chamber can also be used again in the acid leaching process, which can not only solve the problem of environmental pollution caused by lead–containing waste residue but also achieve the recovery and utilization of resources, with good social and economic benefits.

A Facile and Environmentally Friendly Approach for Lead Recovery from Lead Sulfate Residue via Mechanochemical Reduction: Phase Transformation and Reaction Mechanism

Chemical-Free Method for Recovery of Lead from Spent Lead Paste by Reductive Sulfation Technique from By-product Utilization

From Lead Paste to High-Value Nanolead Sulfide Products: A New Application of Mechanochemistry in the Recycling of Spent Lead–Acid Batteries

Recyclable Recovery of Lead from Zinc Hydrometallurgy Residue: By NH 4 Cl-MgCl 2 Leaching and Novel Cyclone-Electrowinning

Phase Transformation Analysis and Process Optimisation of Low-Grade Lead–Zinc Oxysulphide Ore Carbothermal Reduction

An environment-friendly strategy for recovery of α-PbO from spent lead paste: Based on the thermochemical reduction of PbO 2 with ammonium sulfate

The Recovery of Lead from Spent Lead Acid Battery Paste by Electrodeposition in Deep Eutectic Solvent

Ultra-Fast Recyclable and Value-Added Desulfation Method for Spent Lead Paste via Dual Intensification Processes

Pollution-free Recycling of Lead and Sulfur from Spent Lead-Acid Batteries Via a Facile Vacuum Roasting Route

Efficient disposal of lead anode slime for green separation and recycling of hazardous materials As, Sb, and Te

Selective reduction of lead sulfate containing slag using the fluidized bed reactor

An innovative synergistic recycling route of spent lead paste and lead grid based on sodium nitrate reuse

Efficient Desulfurizer Recycling during Spent Lead–Acid Batteries Paste Disposal by Zero‐Carbon Precursor Hypothermic Smelting

An Innovative Process for the Direct Recovery of Lead from Waste Lead Paste

Kinetics study of heavy metal removal from the lead smelting slag by carbothermic reduction: Effect of phase transformation

Desulfurization and structural transformation behavior of lead sulfate in sodium hydroxide molten salt

Recovery and Utilization of Lead in Lead–Containing Waste Residue from Electrolytic Manganese Production

Clean hydrometallurgical route for highly efficient decontamination and recycling of multiple heavy metals from hazardous Pb smelting residues: Multi-objective leaching optimization, adsorption, and risk assessment

Efficient Desulfurizer Recycling during Spent Lead-Acid Batteries Paste Disposal by Zero-Carbon Precursor Hypothermic Smelting

In situ mechanochemical activation of reduced iron powder for arsenic stabilization in high content arsenic sulfide sludge

Activating CaCO3 to Enhance Lead Removal from Lead-Zinc Solution to Serve As Green Technology for the Purification of Mine Tailings