Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Microscopic Characterizations of Heterogeneous Pores, ITZs, Multiple‐Solids, and Their Impacts on Damage Property of Sandstone by Low‐High Resolution 3D Reconstruction

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Digital Microscopic Multiphase Heterogeneity Representation and Its Effects on Micromechanics and Cracking Behaviors of Geomaterials

Study on the characterization of rock heterogeneity and simulation of fracture process based on the mesoscopic structure

Influence of pore structures on the mechanical behavior of low-permeability sandstones: numerical reconstruction and analysis

3D Digital Analysis of Cracking Behaviors of Rocks through 3D Reconstruction Model under Triaxial Compression

Research and analysis of the impact of the pore structure on the mechanical properties and fracture mechanism of sandstone

Effects of Pore Structure on Sandstone Mechanical Properties Based on Micro-CT Reconstruction Model

Pore structure characterization of sandstone under different water invasion cycles using micro-CT

Numerical study on sandstone strength and failure characteristics with heterogeneous structure

Fractal Analysis of Mesoscale Failure Evolution and Microstructure Characterization for Sandstone Using DIP, SEM-EDS, and Micro-CT

Multiscale Damage Analyses of Red Sandstone in Uniaxial Compression Based on Advanced Digital Volume Correlation

Reconstruction of Multiphase Microstructure Based on Statistical Descriptors

Dynamic Response and Meso-Deterioration Mechanism of Water-Saturated Sandstone under Different Porosities

Digital characterization and fractal quantification of the pore structures of tight sandstone at multiple scales

Numerical simulation of strength and failure analysis of heterogeneous sandstone under different loading rates

A 3D reconstruction algorithm controlling effective porosity of sandstone microstructure

Modeling Investigation of Coupling Between Damage and Permeability for Sandstone

A reconstruction method for three‐dimensional pore space using multiple‐point geology statistic based on statistical pattern recognition and microstructure characterization

Grain-scale failure mechanism of porous sandstone: An experimental and numerical FDEM study of the Brazilian Tensile Strength test using CT-Scan microstructure

Numerical Study of Voids Geometry Effects on Sandstone’s Mesoscopic Fracture Mechanism: Insights from Acoustic Emission and Moment Tensor Inversion