Abstract:<p>Many widely used numerical models of rock fracture based on mesoscale laboratory test characterisation of effective 'intact' strength parameters neglect microstructure effects. They therefore cannot explain grain boundary and pore effects on crack propagation and consequently are inadequate for models of rock destruction that exploit point and indentation stresses. Understanding deep drilling processes involving drill-bit buttons and/or water-jetting where rock loading is concentrated in domains with fewer mineral grains will therefore require models with microstructure. To investigate microscale failure mechanisms of granular rocks in diverse scenarios, we target a porous sandstone and introduce a novel workflow consisting of a computerized tomography (CT) based microstructure construction approach and a complementary mechanical numerical approach. The construction approach extracts the realistic rock microstructure and transforms the large voxel number CT-scan data into significantly fewer triangular elements. The finite-discrete element method (FDEM) with grain-based model (GBM) is adopted to solve the mechanics. The microscale failure mechanism of sandstone during the Brazilian test was thoroughly analysed using the numerical results together with the post failure CT-scan test data. The build-up of compressive and tensile stress chains, micro-crack nucleation, local relaxation, chain switching and final crack-path development exploiting pores was illustrated, revealing the micro-to-macro failure mechanism in time and space. Fracture paths in the specimens during Brazilian tensile test were dominated by the pores and the inter-grain boundaries. The tensile strength of the inter-grain joints was estimated to be at least 3.67 times the mesoscale specimen's intact tensile strength, while the pores account for 72.76% of the fracture path. The influence of the cementation distribution and microscale discontinuities was investigated with numerical cases.</p>

What problem does this paper attempt to address?

The key problem that this paper attempts to solve lies in understanding the failure mechanism of porous sandstone at the micro - scale, especially its performance in the Brazilian Tensile Strength test. Specifically, the paper aims to reveal the influence of microstructure (such as pores and grain boundaries) on crack propagation and the final failure path through a combination of experimental and numerical simulation methods. ### Main research questions include: 1. **Influence of microstructure on crack propagation**: Many existing rock fracture models are based on the effective "intact" strength parameters obtained from macroscopic tests, ignoring the influence of microstructure (such as grain boundaries and pores) on crack propagation. Therefore, these models cannot explain the crack propagation mechanism at the micro - scale. 2. **Micro - to - macro failure mechanism**: In order to better understand the high - local - stress loading involved in the deep - drilling process (such as drill - bit buttons or water - jet drilling), it is necessary to establish a model that can reflect the microstructure of the rock. This helps to reveal the failure mechanism from the micro - to - macro scale. 3. **Microstructure modeling and numerical simulation**: How to reasonably incorporate the actual complex rock microstructure into the numerical model and perform efficient simulation while ensuring the computational cost is an important technical challenge. ### Specific objectives of the paper: - Propose a workflow based on CT - scan data for constructing a realistic sandstone microstructure model. - Use the finite - element - discrete - element coupling method (FDEM) combined with the particle - based model (GBM) to conduct a detailed analysis of the micro - failure mechanism of sandstone in the Brazilian Tensile Strength test. - By comparing the numerical simulation results with the CT - scan data after the experiment, explore the influence of cement distribution and micro - discontinuities on the failure of sandstone. ### Formula examples: The formulas involved in the paper include: - The formula for calculating the Brazilian splitting strength: \[ \sigma_t=\frac{2F_{\text{max}}}{\pi Dt} \] where \(\sigma_t\) is the indirect tensile strength, \(F_{\text{max}}\) is the peak load force, and \(D\) and \(t\) are the diameter and thickness of the specimen respectively. - The formula for node displacement update in FDEM: \[ M\ddot{x}+C\dot{x}=F \] where \(M\) is the mass matrix, \(C\) is the damping matrix, and \(F\) is the node force vector. Through these studies, the paper hopes to provide a more accurate micro - failure mechanism model for future rock engineering applications, especially in cases involving high - local - stress loading.

Grain-scale failure mechanism of porous sandstone: An experimental and numerical FDEM study of the Brazilian Tensile Strength test using CT-Scan microstructure

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Tensile mechanical properties and fracture evolution characteristics of sandstone containing parallel pre-cracks under dynamic loading

Investigation of Multiscale Failure Mechanism of Red Bed Soft Rock Using Grain-Based Finite-Discrete Element Method Combined with X-Ray Micro-computerized Tomography

Numerical and Experimental Assessment of the Sandstone Fracture Mechanism by Non-uniform Bonded Particle Modeling

Experimental Study on Dynamic Tensile Mechanical Behavior and Fracture Mechanical Characteristics of Sandstone with a Single Prefabricated Fissure

Study on Hydro-Mechanical Coupling Failure and Permeability Enhancement Mechanisms for Sandstone with T-Shaped Fractures

Fractal Analysis of Mesoscale Failure Evolution and Microstructure Characterization for Sandstone Using DIP, SEM-EDS, and Micro-CT

Mode-I failure and mechanical behavior of sandstone under cyclic loading: Laboratory testing and DEM simulation

Numerical Study of the Strength and Characteristics of Sandstone Samples with Combined Double Hole and Double Fissure Defects

Investigation of three-dimensional model reconstruction and fractal characteristics of crack propagation in jointed sandstone

Investigation of compressive and tensile behaviors for porous sandstone by a microstructure-based constitutive model

Experimental investigation and micromechanical modeling of the brittle-ductile transition behaviors in low-porosity sandstone

Experimental and numerical study on the mechanical behaviors and crack propagation of sandstone containing two parallel fissures

Experimental and numerical simulation study of crack coalescence modes and microcrack propagation law of fissured sandstone under uniaxial compression

Failure characteristics of coarse and fine sandstone containing two parallel fissures subjected to true triaxial stresses

A study of crack initiation and source mechanism in the Brazilian test based on moment tensor

Experimental and Numerical Investigation on the Dynamic Failure Envelope and Cracking Mechanism of Precompressed Rock under Compression-Shear Loads

Multiscale fracture characteristics and failure mechanism quantification method of cracked rock under true triaxial compression

Numerical simulation of strength and failure analysis of heterogeneous sandstone under different loading rates

Failure Characteristics and Failure Process Investigation of Fine-Grained Sandstone under Impact Load by Ultrahigh Speed DIC and SEM Techniques