Abstract:As the most critical part of a hydropower station, reversible pump-turbines (RPTs) are facing the trend of high parameterization (e.g., high head and high rotation speed) with the rapid development of hydropower, which may cause more detrimental cavitation-induced hydrodynamic forces. Considering that cavitation occurs more easily under pump mode than turbine mode for the RPT, the characteristics and generation mechanism of the hydrodynamic radial force induced by cavitation of a RPT model at pump mode are investigated by computational fluid dynamics and experimental methods. Combined with the shear stress transport (SST) turbulence model, the three-dimensional (3D) unsteady Reynolds-averaged Navier-Stokes (URANS) equations are solved to calculate the cavitation flow of the RPT at various cavitation states. The blade loading and the pressure pulsations of the pressure/suction surfaces of the blade are monitored from the inlet to the outlet. Results show that with the development of cavitation, increasing cavitation bubbles covering the blade surfaces lead to the decrease of the blade loading, weaken the regularity of the pressure fluctuation, and increase the amplitude of the pressure pulsation, especially the suction surface. Furthermore, the characteristics of hydrodynamic radial forces under various cavitation states are discussed, and it is found that the values of the hydrodynamic radial forces become larger and the alternating hydrodynamic radial forces are more remarkable with the development of cavitation. Meanwhile, the symmetry of the radial force of the impeller presents a slight change due to the rotor-stator interaction between impeller and guide vanes and the symmetrical structure of the guide vanes. Then, to explore the generation mechanism of the hydrodynamic radial forces, the frequency spectrum of the pressure pulsation and hydrodynamic radial forces are analyzed comparatively. It is found that the hydrodynamic radial forces are affected by the rotor-stator interaction in the initial stage of cavitation, whereas the influence of the pressure distribution of suction surface of the blade increases with the development of cavitation. (c) 2020 American Society of Civil Engineers.

Transient Structural Load Characteristics of Reactor Coolant Pump Rotor System in Rotor Seizure Accident

Research on transient hydraulic characteristics of the whole process of reactor coolant pump under shaft stuck accident

Experimental study of transient characteristics during pump rotor locked accident

Study on cavitating vortex rope characteristics of reversible pump-turbine under part load turbine condition

Analysis of Pressure Pulsation Induced by Rotor-Stator Interaction in Nuclear Reactor Coolant Pump

Study on the Characteristics of the Nuclear Reactor Coolant Pump During the Process-Divided Start-Up Period

Effect of Suction and Discharge Conditions on the Unsteady Flow Phenomena of Axial-Flow Reactor Coolant Pump

Research on gas–liquid two-phase transient process of reactor coolant pump under stuck shaft accident

A Numerical Study on Mechanical Seal Dynamic Characteristics Within a Reactor Coolant Pump

Shutdown idling performance of the nuclear main coolant pump under station blackout accident: An optimization study

Research of Modal Analysis for Impeller of Reactor Coolant Pump

Cavitation Characteristics and Hydrodynamic Radial Forces of a Reversible Pump–Turbine at Pump Mode

Fluid-Structure Coupling Analysis of a Pump-turbine Unit During the Pump Shutdown Transient Process

Study on Flow Characteristics in LBE-cooled Main Coolant Pump under Positive Rotating Condition

Effect of Cooling Pump Transient Power Supply on ETRR-2 Safety Parameters

Study on Dynamic Stress of Pump Turbine Runner During Power Failure in Pump Mode

Experimental and Numerical Investigation of Rotor–Stator Interaction in a Large Prototype Pump–Turbine in Turbine Mode

Fluid–Structure Coupling Analysis of the Stationary Structures of a Prototype Pump Turbine during Load Rejection

Behavior of A Magnetically Suspended Rotor Dropped into Auxiliary Bearings

Analysis on Modeling Rotor System with Sidling Bearing and Ring Seal by Using FEM

Experimental study on pressure fluctuation in header of nuclear power plant SEC system after long-term pump shutdown