Abstract:Modified two-surface model (M2SM) is one of the steel elasto-plastic hysteretic constitutive models that consider both analysis accuracy and efficiency. However, when M2SM is used for complex strain history, sometimes the results are irrational due to the limitation of stress-strain path judgment. In this paper, the defect of M2SM was re-modified by improving the judgment of stress-strain paths. The accuracy and applicability of the improved method were verified on both material and structural level. Based on this improvement, the nonlinear time-history analysis was carried out for a deck-through steel arch bridge with a 200 m-long span under the ground motions of Chi-Chi earthquake and Niigata earthquake. In the analysis, we compared the results obtained by hysteretic constitutive models of improved two-surface model (I2SM) presented in this paper, M2SM and the bilinear kinematic hardening model (BKHM). Results show that, although the analysis precision of displacement response of different steel hysteretic models differs little from each other, the stress-strain responses of the structure are affected by steel hysteretic models apparently. The difference between the stress- strain responses obtained by I2SM and M2SM cannot be neglected. In significantly damaged areas, BKHM gives smaller stress result and obviously different strain response compared with I2SM and M2SM, and tends to overestimate the effect of hysteretic energy dissipation. Moreover, at some position with severe damage, BKHM may underestimate the size of seismic damaged areas. Different steel hysteretic models also have influences on structural damage evaluation results based on deformation behavior and low cycle fatigue, and may lead to completely different judgment of failure, especially in severely damaged areas.

Hysteretic Behavior of an Ancient Chinese Multi-Layer Timber Substructure: A Full-Scale Experimental Test and Analytical Model

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Improvement of hysteretic constitutive model for reinforcements considering buckling

Effect of Hysteretic Constitutive Models on Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridges

Hysteresis behavior of traditional timber structures by full-scale tests

Structural Behavior of Traditional Dieh-Dou Timber Main Frame

Ancient Chinese Timber Architecture. II: Dynamic Characteristics

Shaking table test of an ancient timber structure strengthened with CFRP

Dynamic Analysis Model of Monolayer Hall-Style Ancient Timber Structure

Numerical modelling strategy and load resisting mechanism of palace-type traditional wooden frame

Shaking table test of joints strengthened with CFRP sheet in Chinese ancient timber structure

Lateral performance of mortise-tenon jointed frames in multi-story traditional heavy timber structures: Mechanism and quantification

Dynamic characteristics of Taiwanese traditional Dieh-Dou timber structures

Mechanical Model for Complex Brackets System of the Taiwanese Traditional Dieh-Dou Timber Structures

Analysis on Hysteretic Behavior of Composite Frames with Concrete-Encased CFST Columns

Experimental and numerical analysis on seismic behavior of corner Dou-Gong bracket in ancient timber buildings

Seismic Performance Evaluation for a Traditional Chinese Timber-frame Structure

Experimental Research on the Anti-Seismic Properties of a Five-Stamping Tou-Kung Joint of Ancient Chinese Buildings in the Ming Dynasty: A Case Study of Guang-yue Tower in Liaocheng City, Shandong Province

Shaking Table Test of the Taiwanese Traditional Dieh-Dou Timber Frame

An experimental and simulated investigation into the seismic performance of Chuan-dou timber structures with infilled walls

A fiber beam-column model for damage assessment of traditional Chinese timber structures