Abstract:Abstract The hall-style timber frame built in the Song and Yuan dynasties (960–1368 AD) is one of the most important structural prototypes of the traditional timber architecture in East Asia. The current research, through a typical case of the main hall of Baoguo Temple in Ningbo, China, aims to present an accurate and effective seismic performance evaluation method applicable to hall-style timber structures without time–cost expenditure. To obtain more realistic seismic response of hall-style timber frame, a simplified numerical model of the main hall of Baoguo Temple is established based on in situ measurements and low-cycle reversed loading tests results of mortise–tenon joints, moreover, nonlinear static pushover analysis has been performed to quantify the seismic performance levels under five loading conditions. The generalized force–deformation relationship of the timber plastic hinges is modified regarding to the moment–rotation curves of four special mortise–tenon joints. The seismic behaviour of global hall-style timber frame is evaluated through capacity spectrum method and verified by time history analysis, local failure mechanisms are evaluated by the occurrence sequence of plastic hinges. Finally, a performance-based assessment method adequate for the traditional hall-style timber architectures has been proposed with comparison to the current codes. The results have shown that the structural stiffness of the width-direction is less than that of the depth direction due to the asymmetrical configuration of the timber frame, and the building can maintain a stable state under large lateral displacement before collapsing. The inter-storey drift angles of the building under peak ground accelerations of 0.1 g, 0.2 g, and 0.3 g are less than the suggested ultimate values in the current local codes, however, the main hall represents to be more vulnerable to damage when suffer seismic action along the width-direction. This research can provide a reference for seismic performance evaluation and preventive conservation of ancient hall-style timber architectural heritage.

Hysteresis behavior of traditional timber structures by full-scale tests

Effect of Hysteretic Constitutive Models on Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridges

Seismic performance of Chinese traditional timber frames

Hysteretic behavior of GFRP retrofitted RC bridge short columns

Seismic Performance Evaluation for a Traditional Chinese Timber-frame Structure

Shake table tests on the traditional column-and-tie timber structures

Shaking Table Test on 1/2-Scale Model of Column-and-Tie Timber Structure Filled with Wooden Walls

Ancient Chinese Timber Architecture. II: Dynamic Characteristics

Experimental seismic response of a column-and-tie wooden structure

Investigation on the Seismic Damage and Identification of Lateral Stiffness for Ancient Timber Structures

Seismic Damage Evaluation Model of Chinese Ancient Timber Buildings

Research on seismic performance of traditional Chinese hall-style timber buildings in the Song and Yuan dynasties (960–1368 AD): a case study of the main hall of Baoguo Temple

Shaking table test of joints strengthened with CFRP sheet in Chinese ancient timber structure

Research on the Vibration Fatigue Characteristics of Ancient Building Wood Materials

Ancient Chinese Timber Architecture. I: Experimental Study

Dynamic characteristics of Taiwanese traditional Dieh-Dou timber structures

Evaluation of Dynamic Behaviors and Damage Mechanism of Ancient Timber Architectures

Study on the Dynamic Structural Characteristics of an Ancient Timber — Yingxian Wooden Pagoda

Shaking table test of an ancient timber structure strengthened with CFRP

Full-Scale Seismic Performance Testing of a Predamaged Two-Story Traditional Timber Frame on a Slope Reinforced Using Viscoelastic Dampers

Long-period seismic response of ancient timber buildings