Abstract:High temperature superconducting (HTS) cable represents a promising solution for fulfilling the power demands of cities with large loads and high density. However, due to their connection to the distribution network, HTS cables are vulnerable to fault currents exceeding ten times their rated current, which poses a serious threat to both the safety of the cable and the operation of the grid. Considering the highly nonlinear nature of superconducting conductivity, this study develops a field-circuit coupling model to investigate the transient characteristics of distribution networks incorporating superconducting cables (DNSC). Firstly, a finite element model based on the two-dimensional H formulation was built to calculate the electrical and thermal parameters of the HTS cable. Subsequently, an equivalent circuit model of the distribution network was employed to estimate the short-circuit currents. Communicating via a co-simulation server, the superconducting cable current and distribution network impedance were updated in each step. Further, based on an actual DNSC system in Shenzhen, China, the highest quenching temperature of the cable and the maximum fault current of busbars were assessed. Finally, by integrating current limiters into the system, the withstand capability of the cable and busbars was determined, which indicates that the improved protection configuration can effectively suppress fault currents and ensure safe operation. Successfully applied to an actual distribution network, the co-simulation model utilizing the field-circuit coupling method addresses the challenges of solving highly nonlinear and time-varying systems, enabling transient analysis and protection research for the integration of superconducting devices into the conventional grid.

Comparative Study of Superconducting DC Energy Pipelines with Different Bipolar Structural Layouts

Analysis of Thermo-electric Coupled Simulation for 10 Kv AC XLPE Cable under Different DC Topologies and Laying Modes

Thermal-Fluid Analysis of Coaxial Bipolar Superconducting DC Energy Pipeline

Current Distribution Analysis in Bi2223 Tapes of Superconducting Bipolar DC Energy Pipeline

General design of ±100 kV/1kA energy pipeline for electric power and LNG transportation

Temperature Distribution Characteristics of a New Superconducting Energy Pipeline Structure with High Security

Design and Analysis of Four Different Current Leads for Superconducting DC Energy Pipeline

Analysis of Current Distributions in HTS Tapes of Superconducting Bipolar DC Energy Pipeline

Liquefied Natural Gas for Superconducting Energy Pipelines: A Feasibility Study on Electrical Insulation

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

Electrothermal Coupling Simulation of Termination Insulation of Superconducting Energy Pipeline

Comparison of Insulation Coordination Between ±800kv and ±1100kv UHVDC Systems

Analysis on Insulation Coordination Scheme for ±800 Kv DC Converter Station

Optimal Design and Thermal Analysis of Current Leads in Superconducting Energy Pipeline

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Study and Design of Main Circuit Parameters for ±800 kV/7 500 MW DC Power Transmission Project From Xiluodu to Zhexi

Numerical analysis of thermo-electric field for 10 kV AC XLPE cable in DC operation

Transient Research on Distribution Networks Incorporating Superconducting Cables Utilizing Field–circuit Coupling Method

Simulation study on performance of a long-distance superconducting DC power transmission system

Temperature Analysis of HTS Cables in Superconducting DC Energy Pipeline During Short-circuit Fault

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes