Abstract:The yield surface is the boundary of elastic region in the theory of plasticity, therefore the area and the shape of the yield surface can represent the capability of cellular materials in the stress space. The yield point and the yield surface of one kind of 2D cellular materials, hexagonal honeycombs, is investigated in this study via the finite element analysis with a representative block approach. All components of requisites to computationally investigate yield surface evolution of 2D cellular materials are prepared. A proper determination of yield point for the honeycombs is proposed for the detection of initial and subsequent yield surfaces in the axial-shear stress space and the yield point determination is validated by the comparison between experimental result and finite element analysis. Taking into account a wide range of relative density for honeycombs, the mesh size as well as the pattern and the size of the representative block in finite element is investigated and selected based on the analysis of the mesh convergence analysis, the boundary effect, and the size effect. After probing paths and preloading paths are designed, the initial and subsequent yield surfaces of the honeycombs with different relative density are detected and the influence of relative density on the yield surface evolution is investigated. The investigation shows a shear preloading path followed by an axial preloading path strengthens the capability of honeycombs and the honeycomb with lower relative density may exhibit different behavior of yield surface evolution than those with higher relative density. Further, phenomena of cellular materials including the Bauschinger effect and the hardening behavior (isotropic, kinematic, rotation, distortional) are observed from the yield surface evolution of honeycombs.

Equivalent in-plane elastic modulus of honeycomb sandwich in the direction of cell vertical wall

An approach on identification of equivalent properties of honeycomb core using experimental modal data

Identification of Equivalent Stiffness Parameters of Honeycomb Sandwich Shell Using Detailed Cell Structure Analysis

Structural-acoustic coupling characteristics of honeycomb sandwich plate based on parameter sensitivity analysis

Equivalent-oriented model for sandwich panels with ZPR accordion honeycomb

Elastic properties of honeycombs with spline curve cell walls

Equivalent In-Plane Elastic Moduli of Honeycomb Materials under Hypergravity Conditions

Equivalent orthotropic properties of periodic honeycomb structure: strain-energy approach and homogenization

Out-of-plane engineering constants of beetle elytra inspired sandwich cores

VAM-based equivalent-homogenization model for 3D re-entrant auxetic honeycomb structures

Influence of deformation constraints of core cells on the bending stiffness of single-face honeycomb core sandwich

Analysis of effective elastic parameters of natural bamboo honeycomb cell structure

Energy absorption performance of honeycombs with curved cell walls under quasi-static compression

Hybrid hierarchical square honeycomb with widely tailorable effective in-plane elastic modulus

In-plane compression characteristics of star-shaped honeycomb with asymmetric cells

Numerical modeling of flatwise energy absorption behavior of 3D woven honeycomb composites with different cell structures

Refined Analysis of Torsion and In-plane Shear of Honeycomb Sandwich Structures

Multi-scale characterization and in-plane crushing behavior of the elliptical anti-chiral honeycomb

Finite element analysis on yield surface evolution of cellular materials

A Rate-Independent Constitutive Model for Square Honeycomb Core

Damage sensitivity studies of composite honeycomb sandwich structures under in-plane compression and 4-point bending: experiments and numerical simulations