Abstract:Thin-ply composite failure modes also significantly differ from conventional ply composite failure modes, with the final failure mechanism switching from irregular progressive failure to direct fracture characterized by a uniform fracture with the reduction of the ply thickness. When open holes and bolt joints are involved, thin-ply-laminated composites exhibit more complex stress states, damage evolution, and failure modes. Compared to the experimental study of thin-ply-laminated composite-bolted joints, there are few reports about numerical analysis. In order to understand the damage evolution and failure mechanism of thin-ply-laminated composites jointed by single-lap bolt, a progressive damage model based on three-dimensional (3D) LaRC failure criterion combined with cohesive element is constructed. Through an energy-based damage evolution method, this model can capture some significant mechanical characteristics in thin-ply-laminated structures, such as the in situ effect, delamination inhibition, and fiber compressive kinking failure. The comparisons between the numerical predictions and experimental observations are made to verify the accuracy of the proposed model. It is found that the predicted stress-displacement curves, failure modes, damage morphologies, etc., are consistent with the experimental results, indicating that the presented progressive damage analysis method displays excellent accuracy. The predicted stress at the onset of delamination is 50% higher than that of the conventional thick materials, which is also consistent with experimental results. Moreover, the numerical model provides evidence that the microstructure of thin-ply-laminated composite performs better in uniformity, which is more conducive to inhibiting the intra-layer damage and the expansion of delamination damage between layers. This study on the damage inhibition mechanism of thin-ply provides a potential analytical tool for evaluating damage tolerance and bearing capabilities in thin-ply-laminated composite-bolted joints.

Mechanical properties and failure mechanism of overlap structure for cord-rubber composite

Multilayer structural analysis and application of overlap structure for cord-rubber composite

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Failure Behaviors of Cord-rubber Composite Materials under Mixed Mode I/II Loading: Experimental and Numerical Simulation

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Effect Of The Interface On The Mechanical Properties Of Cord-Rubber Composite

Effect of cord construction on the properties of rubber composites

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Mechanical characteristic and failure mechanism of joint with composite sucker rod

Research on the mechanical properties prediction of carbon/epoxy composite laminates with different void contents

Numerical and experimental study of the mechanical behaviour for FRP-wrapped cement mortar-coal composite disc

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

Experimental and numerical investigation of wear behavior at overlapping area in CFRP/Ti laminated single-lap bolted joint

Investigating the Effects of Contact Area and Chamfering on the Failure Behavior of Plain Woven Composite-Metal T-joints

Investigations on the Mechanical Properties of Composite T-Joints with Defects under Bending Loading

Numerical investigation on the variation of compressive failure mechanisms in unidirectional carbon fiber reinforced polymer

Progressive fracture analysis of the open-hole composite laminates: experiment and simulation

A comparative study on failure mechanisms of open-hole and filled-hole composite laminates: Experiment and numerical simulation

Some Characteristics of Polymer Cord Reinforced Rubber under Tensile and Compressive Loads