Abstract:In this study, integrated experimental tests and computational modeling are proposed to investigate the failure mechanisms of open-hole cross-ply carbon fiber reinforced polymer (CFRP) laminated composites. In particular, we propose two effective methods, which include width-tapered double cantilever beam (WTDCB) and fixed-ratio mixed-mode end load split (FRMMELS) tests, to obtain the experimental data more reliably. We then calibrate the traction-separation laws of cohesive zone model (CZM) used among laminas of the composites by leveraging these two methods. The experimental results of fracture energy, i.e. G Ic and G Tc , obtained from WTDCB and FRMMELS tests are generally insensitive to the crack length thus requiring no effort to accurately measure the crack tip. Moreover, FRMMELS sample contains a fixed mixed-mode ratio of G IIc /G Tc depending on the width taper ratio. Examining comparisons between experimental results of FRMMELS tests and failure surface of B-K failure criterion predicted from a curve fitting, good agreement between the predictions and experimental data has been found, indicating that FRMMELS tests are an effective method to determine mixed-mode fracture criterion. In addition, a coupled experimental-computational modeling of WTDCB, edge notched flexure, and FRMMELS tests are adopted to calibrate and validate the interfacial strengths. Finally, failure mechanisms of open-hole cross-ply CFRP laminates under flexural loading have been studied systematically using experimental and multi-scale computational analyses based on the developed CZM model. The initiation and propagation of delamination, the failure of laminated layers as well as load-displacement curves predicted from computational analyses are in good agreement with what we have observed experimentally.

Experimental and numerical investigation of wear behavior at overlapping area in CFRP/Ti laminated single-lap bolted joint

Interface Damage Behaviour During Interference-Fit Bolt Installation Process for Cfrp/Ti Alloy Joining Structure

Interfacial Wear Damage Mechanism Between Ti-alloy and Al-alloy in Interference-Fit Joint and Influence of Surface Coatings: Experimental and Numerical Study

Interfacial Wear Damage of CFRP/Ti-alloy Single-Lap Bolted Joint after Long-Term Seawater Aging

An insight into the mechanical behavior and failure mechanism of CFRP/Al adhesively bonded structures subjected to low-velocity impact

An Experimental Study on Mechanical Response of Single-Lap Bolted CFRP Composite Interference-Fit Joints

Fretting Behaviors of Interface Between CFRP and Coated Titaniumalloy in Composite Interference-Fit Joints under Service Condition

Experimental and Numerical Analysis on Fatigue Durability of Single-Lap Joints under Vibration Loads

Revealing the Competitive Fatigue Failure Behaviour of CFRP-aluminum Two-Bolt, Double-Lap Joints

Fretting Wear Of Bolted Joint Interfaces

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Progressive Failure of Bolted Single-Lap Joints of Woven Fibre-Reinforced Composites

Understanding friction and wear properties of carbon fiber/epoxy stitched composites

Numerical Investigation of Adhesive Wear and Static Friction Based on the Ductile Fracture of Junction

Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Competitive Fretting Fatigue Failure Analysis of Al Alloy–cfrp Riveted and Adhesive–riveted Single-Shear Lap Joints

Experimental Investigation of the Tribological Behaviors of Carbon Fiber Reinforced Polymer Composites under Boundary Lubrication

Effect Mechanisms of Hygrothermal Environments on Failure of Single-lap and Double-lap CFRP-aluminum Bolted Joints

Experimental and Finite Element Research on the Failure Mechanism of C/C Composite Joint Structures under Out-of-Plane Loading

Effect of Cycling Low Velocity Impact on Mechanical and Wear Properties of CFRP Laminate Composites