Abstract:HZSM-5 is a widely used catalyst for the conversion of methanol to aromatics (MTA), but its single micropore system often results in severe diffusion limitations, leading to the decrease of reaction rate and the change of selectivity to aromatics, as well as affecting the carbon deposition and catalyst deactivation. Thus, an ingenious protective desiliconization method with a mixed solution of sodium hydroxide and tetrapropylammonium hydroxide as a desiliconization agent was developed to create hierarchical porous systems without destruction of the main structure of the molecular sieve. Such modification leads to the greatly increased mesoporous volume from 0.12 to 0.38 cm(3) g(-1), and only slightly decreased microporous volume from 0.12 to 0.09 cm(3) g(-1). However, the desiliconization sharply increases the acidity of the catalyst (from 0.248 to 0.341 mmol g(-1) for the strong acid sites), which may significantly affect the distribution of aromatics and accelerate the carbon deposition rate. Thus, the deposition of inert SiO2 on the catalyst surface is subsequently carried out to passivate the surface acidity and adjust the orifice of the catalyst. Accordingly, a hierarchical porous HZSM-5 molecular sieve catalyst (Si@Z5-Na + TP) with suitable acidity is precisely prepared, which exhibits the high selectivity to benzene, toluene and xylenes (BTX) with the excellent anticoking ability in the MTA reaction. The selectivity to BTX in aromatics (63.32%) and the carbon deposition rate (0.91 mg g(cat)(-1) h(-1)) over the Si@Z5-Na + TP catalyst are both much more superior than those over the parent HZSM-5 catalyst (47.5% and 2.23 mg g(cat)(-1) h(-1), respectively).

Enhancing Btx Selectivity Of The Syngas To Aromatics Reaction Through Silylation Of Ctab Pretreated Zsm-5

Ceria-Zirconia/Zeolite Bifunctional Catalyst for Highly Selective Conversion of Syngas into Aromatics

Insights into the Key Factor of Zeolite Morphology on the Selective Conversion of Syngas to Light Aromatics over a Cr2O3/ZSM-5 Catalyst

Effects of Silylation on Zn-Im5 and Its Catalytic Activity for Butane Aromatization

Direct conversion of syngas into light aromatics over Cu-promoted ZSM-5 with ceria–zirconia solid solution

Optimization of Conditions for Preparation of ZSM-5@silicalite-1 Core–shell Catalysts Via Hydrothermal Synthesis

Enhanced Aromatic Selectivity by the Sheet-Like ZSM-5 in Syngas Conversion

Enhanced light aromatics yield from lignite pyrolysis by remedying the acid sites of different hierarchical HZSM-5

Effect of hydrothermal treatment and silylation on the aromatization of straight-run gasoline over ZNO/HZSM-5 catalyst

Efficient conversion of benzene and syngas to toluene and xylene over ZnO-ZrO2&H-ZSM-5 bifunctional catalysts

C−C Bond Formation in Syngas Conversion over Zinc Sites Grafted on ZSM‐5 Zeolite

Direct Transformation of Syngas to Aromatics over Na-Zn-Fe5C2 and Hierarchical HZSM-5 Tandem Catalysts

Regulating Hierarchical Structure and Acidity of HZSM-5 for Methanol to Aromatics Via Protective Desiliconization and External Surface Modification

Regulation of Acidity Properties of ZSM-5 and Proximity Between Metal Oxide and Zeolite on Bifunctional Catalysts for Enhanced CO2 Hydrogenation to Aromatics

Highly Active Cu-CeZrOx/ZSM-5@Si Catalyst for Direct Conversion of Syngas to Aromatics

Selective Conversion of Syngas to Aromatics over a Mo−ZrO2/H‐ZSM‐5 Bifunctional Catalyst

Bifunctional Catalysts with Versatile Zeolites Enable Unprecedented Para-Xylene Productivity for Syngas Conversion under Mild Conditions

Bifunctional Catalysts for One-Step Conversion of Syngas into Aromatics with Excellent Selectivity and Stability

Performance of Bifunctional ZnZr/ZSM-5 Catalysts in the Alkylation of Benzene with Syngas

Catalytic Synergistic Effect of Bis-Zsm-5 Zeolite with Different Crystal Sizes for Xylene Isomerization

Surface Self-Cleaning Effect of Bifunctional Catalyst to Boost the High Yield Production of Aromatics Directly from Syngas