Abstract:Red mud is a waste generated from the aluminum industry in large quantities. The potential of red mud as a sorbent for beneficial reuse has been the focus of research efforts. However, the limited sorption capacity of red mud has hindered its applications in the removal of environmental pollutants. In this study, the feasibility of heat treatment in improving the sorption of toxic Cd(II) by red mud was investigated in the temperature range of 200-900 °C. Heat treatment at 500 °C resulted in the highest sorption capacity (42.64 mg g-1) and the fastest sorption rate. Further analyses revealed that heat treatment at 500 °C led to significant increases in specific surface area (32.77 m2 g-1), which likely contributed to the enhanced Cd(II) sorption performance. Notably, heat treatment at 500 °C nearly doubled Cd(II) sorption stability as compared with that of raw red mud, as demonstrated by leaching experiments with simulated rainwater. Sequential extraction and XPS analyses indicated that specific sorption was the predominant mechanism involved in Cd(II) removal by red mud heat-treated at 500 °C (RM500). The strength of specific sorption following heat treatment likely contributed to the increase in sorption stability due to the formation of inner-sphere complex (-OCdOH). Metal-metal ion exchange was identified as another sorption mechanism, which, however, likely had only a limited effect on Cd(II) sorption performance. As the final pH (6.57) of the sorption system was typically lower than the pHPZC (about 10.6) of RM500, positive charges would develop on the red mud surface and impede the retention of Cd(II) cations, resulting in weak electrostatic attraction between Cd(II) cations and red mud. In summary, heat treatment at 500 °C considerably enhanced the capacity, rate and stability of Cd(II) sorption by red mud, suggesting red mud could be optimized by heat treatment as a more effective sorbent for Cd(II) removal. These findings represent the first mechanistic characterization of Cd(II) sorption by heat-treated red mud, providing much needed insights into the potential strategies to enhance the effectiveness of red mud in the sorptive removal of toxic heavy metals.

REMOVAL CHARACTERISTICS AND MECHANISMS OF Fe<SUP>2+</SUP> AND Cu<SUP>2+</SUP> FROM SIMULATED ACID MINE DRAINAGE USING MODIFIED RED MUD

Arsenic (III) Removal from a High-Concentration Arsenic (III) Solution by Forming Ferric Arsenite on Red Mud Surface

Arsenate Removal from Aqueous Solutions Using Modified Red Mud.

High‐efficiency Preparation of Fe–Al Based Flocculants from Red Mud by Microwave Selective Carbothermic Reduction and Magnetic Separation

Treatment of Copper-Containing Acid Mine Drainage by Neutralization-Adsorption Process Using Calcite As Neutralizer and Polyhydroxamic Acid Resin As Adsorbent

REMOVAL OF CHROMIUM BY ENHANCED COAGULATION PROCESS USING RED MUD COMBINED WITH FERROUS SULFATE

Treatment of Acid Mine Drainage by Sulfate Reducing Bacteria with Iron in Bench Scale Runs.

Fe(II) bio-oxidation mediates red mud transformations to form Fe(III)/Al (hydr)oxide adsorbent for efficient As(V) removal under acidic conditions

The remediation efficiency of heavy metal pollutants in water by industrial red mud particle waste

Efficient removal of Pb(II) ions from aqueous solution by modified red mud

Red Mud and Modified Red Mud for Remediation of Soil Contaminated with Arsenic

Enhancing Cd(II) sorption by red mud with heat treatment: Performance and mechanisms of sorption

Effective and simultaneous removal of heavy metals and neutralization of acid mine drainage using an attapulgite-soda residue based adsorbent

A facile approach for acid mine drainage treatment by the formation of Fe–Mn layered double hydroxide

Competitive Removal of Water-Borne Copper, Zinc and Cadmium by a CaCO3-dominated Red Mud

Efficient Removal of Heavy Metals from Acid Mine Drainage by Ε-Mno2 Adsorption

Application of Red Mud in Hydrothermal Remediation of Cd- and Petroleum-contaminated Soil

Selective Removal of Iron from Acid Leachate of Red Mud by Aliquat 336

A comprehensive investigation of the adsorption behaviour and mechanism of industrial waste sintering and bayer red muds for heavy metals

Rapid Abiotic As Removal from As-rich Acid Mine Drainage: Effect of Ph, Fe/As Molar Ratio, Oxygen, Temperature, Initial As Concentration and Neutralization Reagent

Competitive adsorption behavior and adsorption mechanism of limestone and activated carbon in polymetallic acid mine water treatment