Novel adsorbent synthesized from red mud and acid mine drainage for enhanced contaminant removal: Industrial waste transformation, adsorbent performance and metal(loid) removal mechanisms
Duo-Rui Zhang,Hong-Rui Chen,Jin-Lan Xia,Zhen-Yuan Nie,Xiao-Juan Zhao,Eva Pakostova
DOI: https://doi.org/10.1016/j.cej.2023.142867
IF: 15.1
2023-04-20
Chemical Engineering Journal
Abstract:Antimony (Sb), arsenic (As), and lead (Pb) are toxic metal(loid)s that can cause serious environmental pollution. The above emphasizes the need for a development of efficient technologies for metal(loid) removal, especially from low-pH environments due to the increased mobility of the contaminants under acidic conditions. Herein, for the first time, removal of Sb(V/III), As(V/III), and Pb(II) from acidic waters is described, using low-cost adsorbents synthesized from red mud (RM; a solid waste from the alumina industry) under the catalysis by acid mine drainage (AMD; acidic effluents from mines). The reactions between RM and AMD were studied to describe Fe/S/Ca/Al/Si speciation transformations during the adsorbent formation. In addition, Sb/As/Pb adsorption behavior and the relationship between adsorbent properties and Sb/As/Pb removal efficiencies were investigated. The maximum removal capacities for Sb(V), Sb(III), As(V), As(III), and Pb(II) reaching 1,637.8, 80.2, 109.2, 16.4, and 518.7 mg/g, respectively. The primarily Ca 2+ from the Ca-bearing compounds (determined in RA2, synthesized under S RM /L AMD 2:1) contributed to Sb(V) removal ( via precipitation of CaSb 2 O 5 (OH) 2 and formation of Sb-bearing precipitate, with silicate gel nanospheres securing high stability of the immobilized Sb). In the As immobilization process, Fe(III) (hydr)oxides (formed in RA4, synthesized under S RM /L AMD 4:1) such as goethite (α-FeOOH) and bernalite (Fe(OH) 3 ) played a dominant role. Convertible sulfates (e.g., CaSO 4 and Al 2 (SO 4 ) 3 ) in RA10 (synthesized under S RM /L AMD 10:1) ensured a high removal capacity for Pb(II) across a wide pH range (2 to 7) via PbSO 4 precipitation. In contrast, the formation of PbCO 3 and Pb 3 (CO 3 ) 2 (OH) 2 was the main mechanism for Pb(II) removal by unamended RM at pH 5.0, while no contaminant removal capacity was observed at pH 2.0.
engineering, chemical, environmental