Abstract:Magnetic nanoparticles (MNPs) modified simultaneously with amorphous Fe and Mn oxides (Mag-Fe-Mn) were synthesized to remove arsenite [As(III)] from water. Mag-Fe-Mn particles were fabricated through heterogeneous nucleation technique by employing the maghemite as the magnetic core and Fe Mn binary oxide (FMBO) as the coating materials. Powder X-ray diffraction, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and transmission electron microscopy were utilized to characterize the hybrid material. With a saturation magnetization of 23.2 emu/g, Mag-Fe-Mn particles with size of 20 -50 nm could be easily separated from solutions with a simple magnetic process in short time (within 5 min). At pH 7.0, 200 mu g/L of As(III) could be easily decreased to below 10 mu g/L by Mag-Fe-Mn particles (0.1 g/L) within 20 min. As(III) could be effectively removed by Mag-Fe-Mn particles at initial pH range from 4 to 8 and the residual As was completely oxidized to less toxic arsenate [As(V)]. The co-occurring redox reactions between Mn oxide and As(III) was confirmed by XPS analysis. Chloride, sulfate, bicarbonate, and nitrate at common concentration range had negligible influence on As(III) removal, whereas, silicate and phosphate reduced the As(III) removal by competing with arsenic species for adsorption sites. As(M) removal was not obviously affected by natural organic matter (up to 8 mg/L as TOC). Mag-Fe-Mn could be regenerated with ternary solution of NaOH, NaCl, and NaClO. Throughout five consecutive cycles, the adsorption and desorption efficiencies maintained above 98% and 87%, respectively. Mag-Fe-Mn had a larger adsorption capacity for As(III) (47.76 mg/g) and could remove trace As(III) more thoroughly than MNPs modified solely with either Fe or Mn oxide due to the synergistic effect of the coating Fe and Mn oxides. This research extended the potential applicability of FMBO to a great extent and provided a convenient approach to efficiently remove trace As(III) from water. (C) 2013 Elsevier Ltd. All rights reserved.

Arsenate Removal from Aqueous Solutions Using Modified Red Mud.

Red mud regulates arsenic fate at acidic pH via regulating arsenopyrite bio-oxidation and S, Fe, Al, Si speciation transformation

Study of sorption processes and FT-IR analysis of arsenate sorbed onto red muds (a bauxite ore processing waste)

Evaluation of chemical immobilization treatments for reducing arsenic transport in red mud

Fe(II) bio-oxidation mediates red mud transformations to form Fe(III)/Al (hydr)oxide adsorbent for efficient As(V) removal under acidic conditions

Novel adsorbent synthesized from red mud and acid mine drainage for enhanced contaminant removal: Industrial waste transformation, adsorbent performance and metal(loid) removal mechanisms

Removal of arsenate by cetyltrimethylammonium bromide modified magnetic nanoparticles.

Hydrothermal chemical modification of red mud for efficient adsorption of methylene blue

Batch study of arsenate (V) adsorption using Akadama mud: Effect of water mineralization

Removal Of Arsenic(Iii) From Aqueous Solution Using A Low-Cost By-Product In Fe-Removal Plants-Fe-Based Backwashing Sludge

Preparation of nano red mud gels using red mud for the encapsulation and stabilization of arsenic in arsenic-bearing gypsum sludge

Synthesis, Characterization and Adsorption of Pb(Ⅱ), Cd(Ⅱ) and Cu(Ⅱ) by Red Mud/polyacrylic Acid/sodium Carboxymethyl Cellulose Hydrogel

Study on the adsorption of arsenate in aqueous solution by zeolite material synthesized from Tay Nguyen red mud

Efficient Removal of Trace Arsenite Through Oxidation and Adsorption by Magnetic Nanoparticles Modified with Fe-Mn Binary Oxide

Protonation stabilized high As/F mobility red mud for Pb/As polluted soil remediation

The Study of Acid Leaching on the Mineralogical and Microscopic Changes of Red Mud

Arsenic removal through adsorption, sand filtration and ultrafiltration: In situ precipitated ferric and manganese binary oxides as adsorbents

A comprehensive investigation of the adsorption behaviour and mechanism of industrial waste sintering and bayer red muds for heavy metals

Selenium and arsenic removal from water using amine sorbent, competitive adsorption and regeneration

Efficient removal of Pb(II) ions from aqueous solution by modified red mud

Characterization of phosphate modified red mud–based composite materials and study on heavy metal adsorption