Abstract:The wide-angle lens is widely used with the advantage of a large field of view, but it is difficult to solve the problem of large distortion. Therefore, the research on how to design a wide-angle low-distortion lens with excellent imaging quality is very meaningful. In this paper, we propose a high-performance wide-angle small distortion optical system, which has a horizontal field angle of 110 degrees and a vertical field angle of 77 degrees, focal length of 2.03mm, f number of 1.65, and a total length of 16.5mm. By introducing a non-rotational symmetric freeform surface into the last side of the wide-angle optical system and combining with several even aspheric surfaces, the f-tan(theta) distortion in the X direction is controlled to -6%similar to+1%, and the f-tan(theta) distortion in the Y direction is controlled to less than 1%. At the same time, the MTF of the system is greater than 0.35 at 125lp/mm, so that the circular image plane can better adapt to the rectangular sensor. In addition, due to the introduction of the freeform surface in the system, the change of system structure with temperature becomes more complex. We carry out thermal analysis for this surface and calculate the change of structure with temperature. Finally, we completed the athermalized design of the lens, so that the wide-angle lens can work in the range of -40 degrees C similar to+80 degrees C. This optical system has great development potential in security monitoring, UAV detection and other fields that may encounter extreme environments.

Design of a Miniature Anamorphic Lens with a Freeform Front Group and an Aspheric Rear Group

Design of a Panoramic Annular Lens System with an Ultra-Wide Angle Via an Annular Gaussian Radial Basis Function Freeform Surface.

A novel optical design for car-camera lenses

High-performance compact athermal panoramic annular lens design with separated radial optical power

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design of a Compact Varifocal Panoramic System Based on the Mechanical Zoom Method.

Design of cell phone camera lens based on glass aspheric lenses

Design of a Panoramic Annular Lens with a Horizontal Symmetric FOV

Ultra-Wide Car Lens Optimization Based on Low-Tg Aspheric Glass

Mathematical Modeling and Implementation of a Panoramic Zoom System Without Central Blind Area

Compact Design of Projection Lens for 3D Profilometry Based on Interferometric Fringes

Design of Vari-Focal Panoramic Annular Lenses Based on Alvarez Surfaces

Design of a Panoramic Annular Lens with a Long Focal Length.

Design of High Resolution Panoramic Endoscope Imaging System Based on Freeform Surface

Miniature wide angle optical system with freeform lens

Design of Panoramic Lens Based on Ogive and Aspheric Surface.

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Chromatically Multi-Focal Optics Based on Micro-Lens Array Design.

Design and analysis of miniature high-resolution omnidirectional gaze optical imaging system

Design and Implementation of a High-Performance Panoramic Annular Lens.

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture