Design of cell phone camera lens based on glass aspheric lenses

Zhu Yongjian,Chen Fengjun,Yin Shaohui,Yu Jianwu,Fan Yufeng

DOI: https://doi.org/10.3969/j.issn.2095-2783.2011.08.003

2011-01-01

Abstract:A novel high-resolution cellphone camera lens with wide field of view(FOV) was designed in order to improve the imaging quality and view scope.The camera lens consists of two pieces of glass aspheric lenses and one piece of plastic aspheric lens.Its total length was 6 mm and the highest order of aspheric glass lens was 10.The image sensor is Kodak KAC-3100 CMOS with a high resolution of 3.1 megapixels.Its pixel size is 2.7 ?m,the diagonal line is 6.9 mm.The limited resolution of lens is 185 lp/mm.Its FOV is 66?,much larger than the general cellphone camera lens.In lens design,the image height is 3.441 8 mm.The novel lens has an F-number of 2.8 and its MTF(modulation transfer function) is higher than 0.15 for all field angles at Nyquist frequency.It features good imaging quality.The lens distortion is ?0.93% at FOV of 66?.The RMS(root mean square) diameter of the light spot is 9.6 ?m.The whole camera lens is composed of two pieces of glass aspheric lenses,one piece of plastic aspheric lens and one piece of IR-cut.Therefore,the glass lens can be made by glass molding press(GMP).The novel lens enjoys higher thermal/mechanical stability and a longer lifetime.The imaging resolution reaches 2 048×1 536 pixels and the effective focus length 5.3 mm.The camera lens is suitable for the high-level cellphone.