Abstract:The wide-angle lens is widely used with the advantage of a large field of view, but it is difficult to solve the problem of large distortion. Therefore, the research on how to design a wide-angle low-distortion lens with excellent imaging quality is very meaningful. In this paper, we propose a high-performance wide-angle small distortion optical system, which has a horizontal field angle of 110 degrees and a vertical field angle of 77 degrees, focal length of 2.03mm, f number of 1.65, and a total length of 16.5mm. By introducing a non-rotational symmetric freeform surface into the last side of the wide-angle optical system and combining with several even aspheric surfaces, the f-tan(theta) distortion in the X direction is controlled to -6%similar to+1%, and the f-tan(theta) distortion in the Y direction is controlled to less than 1%. At the same time, the MTF of the system is greater than 0.35 at 125lp/mm, so that the circular image plane can better adapt to the rectangular sensor. In addition, due to the introduction of the freeform surface in the system, the change of system structure with temperature becomes more complex. We carry out thermal analysis for this surface and calculate the change of structure with temperature. Finally, we completed the athermalized design of the lens, so that the wide-angle lens can work in the range of -40 degrees C similar to+80 degrees C. This optical system has great development potential in security monitoring, UAV detection and other fields that may encounter extreme environments.

Aspheric Far-Infrared Lenses Based on Hot-Moldable Chalcogenide Glass

Ultra-Wide Car Lens Optimization Based on Low-Tg Aspheric Glass

A novel optical design for car-camera lenses

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design of A Panoramic Long-Wave Infrared Athermal System

High-performance compact athermal panoramic annular lens design with separated radial optical power

Design of cell phone camera lens based on glass aspheric lenses

Design of Infrared Hybrid Athermal Optical System

Fabrication of molded chalcogenide-glass lens for thermal imaging applications

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Design of Optical Imaging Lens for Intelligent Transportation Monitoring System

Femtosecond laser writing of infrared microlens arrays on chalcogenide glass

Experimental study of the fabrication of chalcogenide glass lenses by using precision glass molding

Athermal Design And Analysis Of Glass-Plastic Hybrid Lens

Chalcogenide Glass Microfibers for Mid-Infrared Optics

Engineering Materials for Mid-Infrared Optical Sensor Applications

Aberration Athermal Design for Infrared Search and Trace Optical System

Monolithic Kilopixel Silicon Microlens Arrays for Future Far-Infrared Observatories

Chalcogenide Glass Planar Photonics: from Mid-Ir Sensing to 3-D Flexible Substrate Integration

Imaging from the Visible to the Longwave Infrared wavelengths via an inverse-designed flat lens