Abstract:With recent technological advances and the growing interest in environmentally friendly fiber production processes, the textile industry is increasingly turning to the spinning of filaments from recycled raw materials in the melt spinning process as the simplest method of chemical spinning of fibers. Such processes are more efficient because the desired active particles are melt-spun together with the polymer. The study investigates the melt spinning of recycled polyamide 6 (PA 6) fibers modified with zinc oxide nanoparticles (ZnO NPs) in concentrations ranging from 0.1 to 2.0 wt% of the polymer. The extrusion process was optimized under laboratory conditions. An analysis of the effectiveness of the nanoparticle distribution and chemical composition was performed using scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The results of the thermal analysis show an increase in the glass transition temperature of the extruded material from 50.97 °C (raw polymer) to 51.40 °C to 57.98 °C (polymer modified with ZnO NPs) and an increase in the crystallization point from 148.19 °C to a temperature between 175.61 °C and 178.16 °C, while the molar enthalpy (ΔHm) shows a decreasing trend from 65.66 Jg−1 (raw polymer) to 48.23 Jg−1 (PA 6 2.0% ZnO). The FTIR spectra indicate PA 6 polymer, with a characteristic peak at the wavelength 1466 cm−1, but pure ZnO and PA 6 blended with ZnO show a characteristic peak at 2322 cm−1. The distribution of nanoparticles on the fiber surface is more or less randomly distributed and the different size of NPs is visible. These results are confirmed by the EDS results, which show that different concentrations of Zn are present. The mechanical stability of the extruded polymer modified with NPs is not affected by the addition of ZnO NPs, although the overall results of strength (2.56–3.22 cN/tex) and modulus of elasticity of the polymer (28.83–49.90 cN/tex) are lower as there is no drawing process at this stage of the experiment, which certainly helps to increase the final strength of the fibers. The results indicate the potential of modification with ZnO NPs for further advances in sustainable fiber production.

Polypropylene/Ultra-Fine Zno Blended Fibers - Formation And Properties

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Improving the antistatic and antibacterial properties of polypropylene via tetrapod-shaped ZnO@Ag particles

Phase Morphology and Mechanical Properties of the Electrospun Polyoxymethylene/polyurethane Blend Fiber Mats

Research about the Effect of Polypropylene Fiber on Mechanical Properties of Curing Sludge

Thermoplastic polyurethane/silica nanocomposite fibers by electrospinning

Preparation and properties of polytetrafluoroethylene/zinc oxide antibacterial filaments

The preparation of polypropylene microfiber yarns via vortex airflow‐assisted melt differential electrospinning

Surface modification of zinc oxide and its application in polypropylene with excellent fire performance and ultra-violet resistance

Preparation and characterization of polypropylene composites reinforced by functional ZnO/lignin hybrid materials

Effects of Zinc Oxide Nanoparticles on the Morphology and Viscoelastic Properties of Polyamide 6/poly(butylene Terephthalate) Blends

Characterization of Melt-Spun Recycled PA 6 Polymer by Adding ZnO Nanoparticles during the Extrusion Process

Polypropylene Blends with Durable Hydrophobicity and Enhanced Mechanical Properties Based on POSS and Alkane Modified Polypentafluorophenyl Methacrylate

Effect of Multi-Structured Zinc Oxide on the Electrical Properties of Polypropylene Insulating Materials

Preparation and Characterization of Electrospun Mat of Ultra-high Molecular Weight Polyethylene/High-Density Polyethylene Blends

Enhanced antimicrobial property of polyurethane fibers bearing nanoparticles of polyacrylic acid-grafted oleyl amine and zwitterion

PVA Nanofibers Embedded with Different Concentration of ZnO Prepared by Electrospinning Method

Influence of surface modification of zinc oxide on physical properties of high density polyethylene

PROGRESS IN ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE/POLYPYLENE BLENDS

Preparation, characterization, and the antimicrobial activity of PVA-PVP/ZnO nanofiber films via indigenous electrospinning setup

Hierarchical interface design of jute fibers/polypropylene composites for enhanced interfacial and mechanical properties