Abstract:The optimum chromatographic separation conditions, polyatomic ions interference correction, and extraction parameters were investigated for simultaneous extraction and quantification of As(III), dimethylarsinic acid (DMA), monomethylarsonic acid (MMA), As(V) and Cr(VI) with excellent resolution. The ammonium salts (NH4H2PO4 and NH4NO3) were examined as mobile phases at different pH values by altering the composition during the chromatographic run in gradient elution mode using high-performance liquid chromatography – inductively coupled plasma – mass spectrometry (HPLC-ICP-MS). The 10 mM and 70 mM NH4NO3 composition at pH 8.7 enabled sufficient baseline separation of the target As and Cr species at a total run time of 18 minutes. The identified polyatomic ion interferences were corrected by an inter-element method using mathematical equations. The optimum extraction conditions containing a mixture of 0.375 M (NH4)2HPO4 and 50 mM EDTA at neutral pH as an extraction buffer, extraction temperature of 150 °C and volume of 15 mL were attained by a factorial design technique. The lowest concentrations of the selected elemental species that can be reliably detected by the procedure were in the range from 0.064 to 0.682 ng g−1. The accuracy of the developed procedure was demonstrated by achieving percentage recoveries of 96.8% for As(V) and 97.7% for Cr(VI) using San Joaquin Soil standard reference material 2709a. Proposed method was validated by achieving percentage recoveries from 84.9 to 104% for As species and Cr(VI) using spiking and recovery studies at 3x and 25x the limit of quantification values of the target species. The selected As and Cr species in real sediment were monitored using the optimized analytical method. The differences in concentrations of Cr(VI), As(III), MMA and As(V) between the seasonal state of the river were statistically significant (p ˂0.05) at a 95% confidence level as determined by analysis of variance (ANOVA).

Crosslinked Carboxymethyl Starch Based Solid Phase Extraction Combined With Direct Slurry Sampling Graphite Furnace Atomic Absorption Spectrometry For Determination Of Trace Cr(Iii) And Cr(Vi) In Water

Simultaneous Determination of Trace Cr(Iii) and Cr(Vi) in Water Using Ion-Pairing Reversed Phase Chromatography-Inductively Coupled Plasma Mass Spectrometry

Separation and preconcentration system based on ultrasonic probe-assisted ionic liquid dispersive liquid-liquid microextraction for determination trace amount of chromium(VI) by electrothermal atomic absorption spectrometry

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Modified Mesoporous Silica Materials for On-Line Separation and Preconcentration of Hexavalent Chromium Using a Microcolumn Coupled with Flame Atomic Absorption Spectrometry.

Flow Injection Microfluidic Device with On-Line Fluorescent Derivatization for the Determination of Cr(III) and Cr(VI) in Water Samples after Solid Phase Extraction.

Chromium Speciation by On-line Separation and Preconcentration on Surfactant Modified Clinoptilolite Zeolite with Detection by Electrothermal Atomic Absorption Spectrometry

Speciation Analysis of Cr(VI) and Cr(III) in Water with Surface-Enhanced Raman Spectroscopy

Cr(III) Ion-Imprinted Hydrogel Membrane for Chromium Speciation Analysis in Water Samples

Synchronous Extraction and Quantitative Speciation of Arsenic and Chromium in Sediments by High-Performance Liquid Chromatography – Inductively Coupled Plasma – Mass Spectrometry (HPLC-ICP-MS)

A MWCNTs@CuAl2O4@SiO2 Nanocomposite for the Speciation of Cr(III), Cr(VI), and Total Chromium Prior to High-Resolution Continuum Source Flame Atomic Absorption Spectrometric Determination

Thin Resin Phase Spectrophotometric Determination of Chromium(ⅵ) and Chromium(ⅲ) in Water Sample after Ion Exchange Resin Phase Preconcentration

Speciation of bio-available chromium in soils by solid-phase extraction and graphite furnace atomic absorption spectrometry

Octyl coated cobalt-ferrite/silica core-shell nanoparticles for ultrasonic assisted-magnetic solid-phase extraction and speciation of trace amount of chromium in water samples

Determination of Chromium(vi) and Lead(ii) in Drinking Water by Electrokinetic Flow Analysis System and Graphite Furnace Atomic Absorption Spectrometry.

A novel sequential extraction method for the measurement of Cr(VI) and Cr(III) species distribution in soil: New insights into the chromium speciation

A new surface molecularly imprinted polyacrylamide nanoprobe for trace Cr(VI) with RRS technique

Solid phase extraction method for the separation and determination of chromium(III) in the presence of chromium(VI) using silica gel modified by N,N'-bis-(α-methylsalicylidene)-2,2-dimethyl-1,3-propanediimine

Automated salting-out assisted single-phase liquid–liquid extraction of Cr(VI) from river water samples prior to its atomic absorption spectrometric determination

The Investigation of Triadic Silica-Supported Polyhexamethylene Guanidine@nano-Hydroxyapatite Nanocomposites for Cr (VI) Detection

Speciation of Chromium by Magnetic Solid Phase Microextraction Using an Activated Charcoal-Molybdenum (IV) Selenide-Magnetite Composite with Flame Atomic Absorption Spectrometric (FAAS) Detection