Abstract:There is an increasing need for fast and reliable analytical methods for the determination of chemical forms of elements in environmental samples. The interest in chromium is driven by the fact that its toxicity depends on its oxidation state. Although chromium (III) is essential for mammals to maintain their metabolism of proteins, fats, and carbohydrates, chromium (VI) is toxic to humans. For chromium speciation, several costly analytical methods coupling separation methods with atomic absorption and emission spectroscopy have been developed. This article presents the online robotic discrete analyser procedure with the 1,5 diphenylcarbazide (DPC) method for the speciation of Cr (III) and Cr (VI). Cr (III) was determined by difference since it does not interfere with the reaction of Cr (VI)-DPC. Chromium (VI) and total chromium were characterised sequentially (after online oxidation of Cr (III) by Cerium (Ce (IV)). The calibration graphs were linear under experimental conditions up to 1 mg/L Cr (VI) and 2 mg/L total Cr with correlation coefficient R2, 0.9997 and 0.9999 respectively. At a signal-to-noise ratio of three, the detection limits were 0.004 mg/L Cr (VI) and 0.015 mg/L total Cr. Good agreement between the real values of certified reference materials and the chromium species content was obtained in this study. The method was precise with a percentage relative standard deviation of less than 2 for hexavalent chromium and total chromium. The t-stat demonstrates that there was no significant difference between the developed robotic discrete analyser method and the ICP-MS method. Except for effluent water, which had recoveries between 65 and 75 % in the assessment of the devised method's selectivity, the overall percentage of recoveries fell between 90 and 110 %, which was generally satisfactory. This method proved to be appropriate for its intended use.

Speciation of Chromium by Magnetic Solid Phase Microextraction Using an Activated Charcoal-Molybdenum (IV) Selenide-Magnetite Composite with Flame Atomic Absorption Spectrometric (FAAS) Detection

Chromium speciation in water using magnetic polyaniline nanoparticles coupled with microsampling injection-flame atomic absorption spectroscopy

Speciation of chromium in environmental samples by dual electromembrane extraction system followed by high performance liquid chromatography

A MWCNTs@CuAl2O4@SiO2 Nanocomposite for the Speciation of Cr(III), Cr(VI), and Total Chromium Prior to High-Resolution Continuum Source Flame Atomic Absorption Spectrometric Determination

Chromium Speciation by On-line Separation and Preconcentration on Surfactant Modified Clinoptilolite Zeolite with Detection by Electrothermal Atomic Absorption Spectrometry

Chromium (III) ion determination and speciation in honey & hardaliye samples using magnetic solid-phase extraction and FAAS

Octyl coated cobalt-ferrite/silica core-shell nanoparticles for ultrasonic assisted-magnetic solid-phase extraction and speciation of trace amount of chromium in water samples

Salt-Assisted Bulk Liquid Membrane and Flame Atomic Absorption Spectrometry for the Separation and Determination of Chromium(VI)

A new chelating resin: Synthesis, characterization and application for speciation of chromium (III)/(VI) species

Speciation of bio-available chromium in soils by solid-phase extraction and graphite furnace atomic absorption spectrometry

Ultrasound-assisted dispersive micro-solid phase extraction using molybdenum disulfide supported on reduced graphene oxide for energy dispersive X-ray fluorescence spectrometric determination of chromium species in water

Separation and preconcentration system based on ultrasonic probe-assisted ionic liquid dispersive liquid-liquid microextraction for determination trace amount of chromium(VI) by electrothermal atomic absorption spectrometry

Synthesis of Surface Cr (Vi)-Imprinted Magnetic Nanoparticles for Selective Dispersive Solid-Phase Extraction and Determination of Cr (VI) in Water Samples

Determination of Cr(III) and Total Chromium in Water Samples by Cloud Point Extraction and Flame Atomic Absorption Spectrometry

A sensitive speciation analysis of chromium in natural and industrial effluents by electrothermal atomic absorption spectrometry after a novel ligandless mixed-micelle dispersive liquid–liquid microextraction

Study on Speciation Analysis of Cr(Ⅲ) & (Ⅵ) in Environmental Samples by High Performance Liquid Chromatography Coupled with Inductively Coupled Plasma Mass Spectrometry

Optimization of species stability and interconversion during the complexing reaction for chromium speciation by high-performance liquid chromatography with inductively coupled plasma mass spectrometry.

Determination of chromium species in water using diphenylcarbazide with a sequential spectrophotometric discrete robotic analyser

Deep eutectic solvent decomposition-based microextraction for chromium determination in aqueous environments by atomic absorption spectrometry with electrothermal atomization

Modified Mesoporous Silica Materials for On-Line Separation and Preconcentration of Hexavalent Chromium Using a Microcolumn Coupled with Flame Atomic Absorption Spectrometry.

Short‐column CE Coupled with Inductively Coupled Plasma MS for High‐throughput Speciation Analysis of Chromium