Abstract:Melt-grown oxide eutectic ceramics are well known for their excellent mechanical properties and microstructural stabilities at ultra-high temperatures. Laser powder bed fusion (LPBF) provides a novel technology for manufacturing materials with large sizes and complex structures. However, crack controlling is a serious challenge in this process owing to the intrinsic brittleness of ceramic materials. In this study, LPBF method is applied to fabricate Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics assisted by a finite element method (FEM) to investigate an optimized process and innovatively reveal the crack formation mechanism and propagation behavior via a single track, a single layer, and multilayers. Temperature and thermal stress distributions under different process parameters are obtained. The maximum tensile stress & sigma;y (in front of and behind the edge of the molten pool) perpendicular to the scanning direction induces a longitudinal crack, the tensile stress & sigma;x (at the side rim of the molten pool) parallel to the scanning direction induces a transverse crack, and the shearing stress on the XY plane promotes the deflection of the transverse crack on one side of the single track. In the multilayer, the maximum principal stress occurs at the margin zone of the deposition. The maximum principal stress increases at the first three layers and then decreases after the fourth layer. Based on the simulation result, the as-solidified Al2O3/GdAlO3/ZrO2 eutectic ceramics with multiple shapes, such as cylindrical, cubic with round corners, triangular prism, and quadrangular, with dimensions of 30 mm (width or diameter) x 30 mm (length or diameter) x 1 mm (height) and ultra-fine eutectic microstructures (eutectic spacing of approximately 88 nm) are fabricated by LPBF, providing a significant potential to overcome the bottleneck for fabricating large-size and complex-structure ceramics directly in a single-step process. This work provides theoretic foundation and technical support for preparation of ultra-high temperature solidified oxide eutectic ceramics with ultra-fine microstructures and complex structures directly, which has great application potential in fields as aerospace, machinery, and chemical industry.

EFFECT OF LAYER THICKNESS ON CRACK SUPPRESSION IN LASER ENGINEERED NET SHAPING OF CERAMIC STRUCTURE

Process Optimization for Suppressing Cracks in Laser Engineered Net Shaping of Al 2 O 3 Ceramics

Additive manufacturing of ceramic structures by laser engineered net shaping

Microstructure and macro properties of Al 2 O 3 ceramics prepared by laser engineered net shaping

Formation mechanism and process optimization of nano Al2O3-ZrO2 eutectic ceramic via laser engineered net shaping (LENS)

Morphology and formation mechanism of cracks in Al2O3–ZrO2 eutectic ceramics fabricated via laser powder bed fusion

Research Progress on Formation and Suppression of Crack Defects in Oxide Eutectic Ceramics by Laser Additive Manufacturing

Effect of Ultrasonic Power on Forming Quality of Nano-Sized Al2O3-ZrO2 Eutectic Ceramic Via Laser Engineered Net Shaping (LENS)

Cracking Mechanism in Laser Directed Energy Deposition of Melt Growth Alumina/aluminum Titanate Ceramics

Rapid Fabrication of Eutectic Ceramic Structures by Laser Engineered Net Shaping

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Power Prediction for Laser Engineered Net Shaping of Al2o3 Ceramic Parts

Effect of process parameters on crack characteristics in laser welding of Al2O3 ceramic

3D Printing of Nano-Scale Al2O3-ZrO2 Eutectic Ceramic: Principle Analysis and Process Optimization of Pores

Enhanced Crack Resistance in Ceramic Shells Fabricated with Photosensitive Resin Models Printed by Stereolithography Through Buffer Layer Integration

Large-size Complex-Structure Ternary Eutectic Ceramic Fabricated Using Laser Powder Bed Fusion Assisted with Finite Element Analysis

Shaping Quality, Microstructure, and Mechanical Properties of Melt-Grown Mullite Ceramics by Directed Laser Deposition

The effect of laser sintering on the microstructure, relative density, and cracking of sol-gel-derived silica thin films

Formation mechanism and controlling strategy of lamellar structure in 3D printed alumina ceramics by digital light processing

Cracking mechanism of SS316/Ni20 composite fabricated by laser engineered net shaping

An Overview of Laser Engineered Net Shaping of Ceramics