Abstract:The defects sited on the surface and internal grain boundaries in organic–inorganic hybrid perovskites always capture the carriers and become the recombination centers, causing the decrease in carrier lifetime. Meanwhile, these centers are inclined to become the adsorption sites for water and oxygen, thus leading to the decrease in power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). Herein, a facile strategy is demonstrated by utilizing a self-assembled ammonium salt named phenyltrimethylammonium bromide (PTABr) to modify perovskite films. This way is efficient to passivate the PbI<sub>3</sub><sup>–</sup> antidefects and enhance the stability under air atmosphere conditions. Experiments and theoretical calculations have demonstrated that self-assembled PTABr shows a hydrophobic aliphatic moiety-on orientation on the surface perovskite, effectively reduces the density of the trap state in perovskite film, and enhances the carrier lifetime. The strategy results in the enhancement of both photovoltaic properties and stability of PSCs; the champion PTABr-treated device shows a PCE over 20% and maintains 86% of its initial PCE after 60 days in ambient atmosphere without encapsulation. This method paves a novel way to improve the surface hydrophobicity and promote the overall properties of the device.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c02983?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02983</a>.Experimental section; chemical structure of PTABr, ESP map of PTABr, HOMO and LUMO orbitals of PTABr; UV–vis adsorption for untreated and PTABr-treated perovskite film; Tauc plots of perovskite film (a) untreated and (b) PTABr-treated; 2D slices of charge density difference of PTABr adsorbed on the (001) perovskite surface; schematic illustrations of (a) untreated and (b) PTABr-treated device structure for the SCLC; chemical structure of LAD, ESP map of LAD, HOMO, and LUMO orbitals of LAD, the mechanism of LAD-doped PTAA; steady-state JSC output at MPP for the untreated and PTABr-treated devices; statistical distributions of photovoltaic parameters for untreated PSCs and PTABr-treated PSCs; Nyquist plot of pristine and PTABr-treated devices; equivalent circuit employed to fit the Nyquist plots; image of untreated PSCs and PSCs treated in ambient atmosphere for 60 days; HOMO and LUMO orbitals of water molecules; optimized structure of the bare (001) perovskite surface; HOMO orbitals of water adsorbed on untreated and PTABr-treated perovskite surfaces; the TRPL parameters obtained by fitting the PL delaying curves; photovoltaic parameters for different concentrations of PTABr-treated PSCs; a brief summary of HTL/perovskite interface-modified PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02983/suppl_file/sc0c02983_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Mechanistic Understanding Of Cetyltrimethylammonium Bromideassisted Durable Ch(3)Nh(3)Pbl(3) Film For Stable Zno-Based Perovskite Solar Cells

Mechanistic Understanding of Cetyltrimethylammonium Bromide-Assisted Durable CH 3 NH 3 PbI 3 Film for Stable ZnO-Based Perovskite Solar Cells

Modification of Energy Levels by Cetyltrimethylammonium Bromide at the Perovskite/Carbon Interface for Highly Efficient and Stable Perovskite Solar Cells

Surface passivation by CTAB toward high efficiency and stability perovskite solar cells

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

High-quality CsPbBr3 films prepared by introducing methylammonium iodide into PbBr2 precursor for efficient perovskite solar cells

Passivation Mechanism of Perovskite Upper Interface based on MAPbBr3 Quantum Dots for Efficient and Stable Perovskite Solar Cells

CH 3 NH 3 PbBr 3– x I x Quantum Dots Enhance Bulk Crystallization and Interface Charge Transfer for Efficient and Stable Perovskite Solar Cells

In Situ Grain Boundary Functionalization for Stable and Efficient Inorganic CsPbI2Br Perovskite Solar Cells

A Halide Exchange Engineering for CH3NH3PbI3−Br Perovskite Solar Cells with High Performance and Stability

Targeting the imperfections at the ZnO/CsPbI2Br interface for low-temperature carbon-based perovskite solar cells

Improving the Performances of CsPbBr3 Solar Cells Fabricated in Ambient Condition

Hydrophobic Organic Ammonium Halide Modification toward Highly Efficient and Stable CsPbI 2.25 Br 0.75 Solar Cell

Crystallization Management of CsPbI2Br Perovskites by PbAc2-incorporated Twice Spin-Coating Process for Efficient and Stable CsPbI2Br Perovskite Solar Cells

Controlling the Film Structure by Regulating 2D Ruddlesden–Popper Perovskite Formation Enthalpy for Efficient and Stable Tri-Cation Perovskite Solar Cells

Bifunctional Stabilization of All-Inorganic Α-Cspbi3 Perovskite for 17% Efficiency Photovoltaics.

Facile fabrication of large-grain CH 3 NH 3 PbI 3− x Br x films for high-efficiency solar cells via CH 3 NH 3 Br-selective Ostwald ripening

Effective defect passivation with a designer ionic molecule for high-efficiency vapour-deposited inorganic phase-pure CsPbBr3 perovskite solar cells

Organic Ligands Armored ZnO Enhances Efficiency and Stability of CsPbI2Br Perovskite Solar Cells

Self-Assembled Hydrophobic Molecule-Based Surface Modification: A Strategy to Improve Efficiency and Stability of Perovskite Solar Cells

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%