Abstract:Surface texturing is an effective technology for enhancing lubrication and anti-wear properties through hydrodynamic effects and secondary lubrication. In this study, two types of variable-depth groove textures were designed to enhance the lubrication performance of friction pairs. Based on theoretical analysis, the coefficient of friction (COF), wear characteristics, and triboelectric open-circuit voltages produced by different textures were evaluated in a series of experiments. Using a friction testing setup, scanning electron microscopy, energy dispersive spectrometry, an electrometer (Keithley 6514), Raman spectroscopy, surface microtopography, and lubrication mechanisms were revealed. First, two types of variable-depth groove textures were designed based on computational fluid dynamics. Second, SiC samples with these textures were fabricated using laser surface texturing technology, and ball–disk rotary friction experiments were performed. During the friction tests, the shallow inner and deep outer (SDT) groove textures exhibited a lower COF at medium and low speeds under varying loads. Finally, the lubrication mechanism was attributed to the synergistic effect of four factors: the hydrodynamic effect of the lubricant, enhanced ability of debris expulsion, oxide tribofilms at the interface, and polarization electric field generated at the solid–liquid interfaces between the lubricant and friction pair. The results indicate that the minimum COF of the SDT texture can be reduced to 0.025. These insights offer valuable guidance for design methods and new lubrication mechanisms for enhancing the lubrication and anti-wear properties of friction pairs in mechanical systems.

Effect of Oil Groove Depth on Friction Performance of Copper Based Friction Materials with Different Graphite Content

Wear Mechanism of Copper-based Powder Metallurgical Friction Materials with Different Graphite Content

Study on the Tribological Performance of Copper-Based Powder Metallurgical Friction Materials with Cu-Coated or Uncoated Graphite Particles as Lubricants

Effect of Carbonaceous Components on Tribological Properties of Copper-Free NAO Friction Material

Effects of Fe and graphite on friction and wear properties of brake friction materials for high-speed and heavy-duty vehicles

Tribological Properties of Lubricating Oil with Sheet Graphite Nanoparticles

Synergistic Effects of Different Graphite on the Braking Performance of Cu-Matrix Friction Materials for High-Speed Trains Based on Pin–Disc Tests

An Investigation on Tribological Properties and Lubrication Mechanism of Graphite Nanoparticles as Vegetable Based Oil Additive

An investigation on the tribological behaviors of steel/copper and steel/steel friction pairs via lubrication with a graphene additive

Effect of Iron Powder Type on Friction and Wear Properties of Copper-Based Friction Powder Metallurgy Material

Effects of a hierarchical pore structure on the tribological properties of an oil-containing iron-based composite

Achieving Controllable Friction of Ultrafine-Grained Graphite HPG510 by Tailoring the Interfacial Nanostructures

Friction and Wear Behavior of Copper-Graphite Composite Material in High-Speed Sliding with Current

Effects of grooved surface texture on friction noise

On the tribological behaviors of Cu matrix composites with different Cu-coated graphite content

An Investigation on Tribological Properties of Graphite Nanosheets As Oil Additive

Study on Tribological Behavior of Zinc Phosphate Impregnated Graphite Under Oil Lubrication Condition

Influence of Variable-Depth Groove Texture on the Friction and Wear Performance of GCr15–SiC Friction Pairs Under Water Lubrication

In-Situ Observation and Discrete Element Simulation of Solid Graphite Lubrication Mechanism

Effect of copper oxide@boron nitride nanosheet hybrid nanocomposite on tribological properties of paraffin liquid

Effect of Bimodal Structure on the Frictional Properties of Copper–Graphite Composites