Abstract:Mineral carbonation is an important technical option for the effective reduction of CO2 emissions. Natural magnesium-containing minerals, such as serpentine and blast furnace slag (BFS), have recently been used for CO2 storage with an indirect carbonation route using ammonium sulfate. In this study, the effects of the feeding mode and process parameters on the magnesium conversion, product phase, and morphology during the aqueous carbonation of MgSO4 with ammonium carbonate solution were investigated in detail. The results showed that the carbonation ratio with a parallel feed was higher than the forward and reverse feed by about 3-5% with a limited reaction time, and the product size was more uniform. The phase and morphology of the products were affected significantly by the temperature. The highest carbonation ratio appeared at 40 degrees C because only 75% of magnesium was carbonated if hydromagnesite was produced. When the mole ratio of (NH4)(2)CO3 to MgSO4 was 2:1 and the concentration of magnesium sulfate was higher than 0.4 mol L -1, the carbonated products contain ammonium magnesium carbonate, and the ammonia should be recovered by selective thermal decomposition. When the mole ratio decreased to 1.5:1, only nesquehonite appears with high crystallinity and uniform size. The optimized conditions were therefore selected as 40 degrees C, a mole ratio of 1.5:1, and magnesium sulfate concentration of 0.7 mol L -1. Under these conditions the carbonation ratio reached 88%. Additionally, the optimal initial pH of MgSO4 solution was 9.5 (the product was nesquehonite at low pH) while the hydromagnesite will be produced at higher pH (pH more than 10). (c) 2019 Society of Chemical Industry and John Wiley & Sons, Ltd.

The Kinetics Of Co2 Indirect Mineralization Of Mgso4 To Produce Mgco3 Center Dot 3h(2)O

The Kinetics of CO2 Indirect Mineralization of MgSO4 to Produce MgCO3·

The Crystallization Kinetic Model of Nano-Caco3 in CO2-ammonia-phosphogypsum Three-Phase Reaction System

Particle Carbonation Kinetics Models and Activation Methods under Mild Environment: the Case of Calcium Silicate

Theoretical and Mechanistic Insights into Control Factor-Assisted CO2 Mineralization with Olivine

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Aqueous Carbonation of MgSO4 with (NH4)(2)CO3 for CO2 Sequestration

Reaction Kinetics of an Mg/CO2 Power System for Mars Exploration

CO2 Absorption and Magnesium Carbonate Precipitation in MgCl2–NH3–NH4Cl Solutions: Implications for Carbon Capture and Storage

Effects of NO3– and SO42– Ions on the Coupled Reaction–Extraction–Crystallization Process of MgCl2 and CO2

Enhanced Mechanism of Molten Alkali Nitrates on Triple-Phase Interface During the Carbonation of MgO

The Regulating Mechanism Of Mgco3 Center Dot 3h(2)O Whisker Growth Orientation With The Presence Of Sds

Mechanism of Autocatalytic Reduction of CO2 over MgCO3 to High Value-Added Chemicals: A DFT & AIMD Study

Phase Equilibrium of the MgSO4–(NH4)2SO4–H2O Ternary System: Effects of Sulfuric Acid and Iron Sulfate and Its Application in Mineral Carbonation of Serpentine

Mass Transfer and Reaction Kinetics in the Carbonization of Magnesium Oxide from Light Calcined Magnesia with Mechanical Force Enhancement

Modeling of Multistep Ca2+ Transfer in the Carbonation System of CO2-NH4OH-CaSO4·2H2O-CaCO3

Morphology and stability of mineralized carbon influenced by magnesium ions

Thermodynamic analysis on the dissolution equilibria of MgCO3((s)) in the system of Mg(II)-NH3-CO32--SO42--H2O

Kinetic Modeling of Direct Aqueous Mineral Carbonation Using Carbide Slag in a Stirred Tank Reactor

Kinetics of removal of CO2 by calcium-based sorbents