Abstract:Phosphogypsum is an industrial waste generated in the production of fertilizers causing environmental problems. Calcined phosphogypsum (CPG) is obtained by low-temperature calcination and dehydration of phosphogypsum. CPG is mainly used to produce building materials. However, mechanical strength properties and water resistance of CPG materials is extremely poor, which leads to its relatively low utilization rate in construction industry. To address this issue, various amount of Ordinary Portland cement (OPC), fly ash (FA), rice husk (RH) and modified admixtures (AD) were mixed with the CPG to obtain CPG-based composite cementitious materials, which enhanced the water resistance and mechanical strength of the corresponding hardened materials. The influence of different contents of cement on the setting time, hydration heat, hydration products, mechanical properties, water absorption, heavy metal leaching and deterioration coefficient of the composite cementitious material is investigated. The results showed that the optimal mixing ratio of CPG: OPC: FA: RH was 57: 20: 10: 13 considering the water resistance and mechanical strength properties of CPG-based composite cementitious materials. On these conditions, the compressive strength, the flexural strength, water absorption and deterioration coefficient of the specimens at 28 days are 6.1 MPa, 4.6 MPa, 29.4% and 0.66 respectively, which were in line with the national standard of phosphorus building gypsum wallboard. It was demonstrated that two skeleton types are present in the samples prepared using CPG-based composite cementitious materials, which had a synergistic support effect on the structure. The first skeleton was formed by gypsum dihydrate crystals (CaSO 4 ·2H 2 O) and provided strength to the specimens at an early stage, while the second skeleton was formed by ettringite (AFt) and C–S–H gels, which provided strength at a later stage. The skeletons make the hardened materials denser and more waterproof. Moreover, the composite materials exhibited a positive solidification effect on heavy metals present in CPG.

Influence Of Autoclaved Pretreatment On The Properties Of Phosphogypsum-Based Composite Binders

Influences of pretreatment methods on the mechanical and environmental behaviors of PG-GGBS-LM ternary stabilizer

Influence of cement on properties of calcined phosphogypsum based composite cementitious materials

The effects of admixtures on the durability properties of phosphogypsum-based cementitious materials

Research on the pretreatment and mechanical performance of undisturbed phosphogypsum

Study on preparation of inorganic binder stabilized material with large dosage of phosphogypsum

The workability kinetics of phosphogypsum binder

Investigation on a New Hydraulic Cementitious Binder Made from Phosphogypsum

Study on physical and chemical characteristics of β-hemihydrate phosphogypsum

Effect of the phosphogypsum calcination time on the compressive mechanical properties of phosphogypsum-based composite cementitious materials

Thermal and Mechanical Properties Enhancement of Cement Mortar using Phosphogypsum Waste: Experimental and Modeling Study

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

Investigation on the hydration of hemihydrate phosphogypsum after post treatment

Influence of calcination and GGBS addition in preparing β-hemihydrate synthetic gypsum from phosphogypsum

Study on the Mechanical Properties, Microstructure and Hydration Mechanism of Phosphogypsum-Based Geopolymer Cement with Added Micron-Sized Silica Particles

An investigation on the anti-water properties of phosphorus building gypsum (PBG)-based mortar

Effect of water-binder ratio on properties of phosphogypsum binder

Effects of phosphogypsum on hydration properties and strength of calcium aluminate cement

Effect of calcination temperature and superplasticizer on the properties of anhydrite II from phosphogypsum

Cementitious binder of phosphogypsum and other materials