Abstract:Pneumatic compact spinning is one of the most widely used compact spinning systems, which is achieved by utilizing airflow condensing equipment to condense fibers in bundle and improve yarn properties. Therefore, research on flow field in the condensing zone is always the emphasis and difficulty for pneumatic compact spinning. In this paper, the three-dimensional flow field of four different kinds of pneumatic compact spinning systems, including two types of roller-type compact spinning, namely compact spinning with a perforated drum and compact spinning with a groovy drum, and two types of lattice apron-type compact spinning, namely three-line rollers compact spinning and four-line rollers compact spinning, are investigated using the Finite Element Method. Firstly, four three-dimensional physical models of the condensing zone are built by AutoCAD software respectively according to the measured geometric parameters of practical condensing zones. Then, using ANSYS software, the numerical simulations of the three-dimensional flow field in the condensing zone for four kinds of compact spinning systems are obtained. It is shown that the flow field distribution of the condensing zone of roller-type compact spinning is different from that of lattice apron-type compact spinning and the flow field distribution of the condensing zone is significantly related to yarn properties. Comparing with roller-type compact spinning, lattice apron-type compact spinning has lower negative value of the flow velocity in the X-axis direction, a higher value in the Y-axis direction and a higher value in the Z-axis direction. Combined with yarn experiments, it is shown that the flow velocity component in the X-axis direction has an assistant condensing effect and the negative value mainly increases yarn beneficial hairiness. Roller-type compact spinning has a higher negative value and more beneficial hairiness correspondingly than lattice apron-type compact spinning; the flow velocity component in the Y-axis direction has a direct condensing effect, which is of benefit mainly for improving strength and reducing hairiness. Lattice apron-type compact spinning has a higher value and higher strength and less hairiness than roller-type compact spinning; the flow velocity component in the Z-axis direction has an assistant condensing effect, which is mainly of benefit for improving yarn evenness. Lattice apron-type compact spinning has a higher value and better evenness than roller-type compact spinning.

Reducing Spinning Production Costs By Optimizing The Frequency Of Spin Pack Changes

The Optimization of the Key Components of the Spinning Machine Conveyor System Based on ISIGHT

Optimal Replacement Scheduling For The Spin Pack In Polyester Filament Plant

Test Analysis of Improving CV Value in Spinning Production

Optimization of the Production Process of Flash-Spinning UHMWPE Superfine Fiber by Response Surface Methodology

Tuning drafting zone parameters for polyester yarn within a ring spinning system: modeling and optimization

Test and Research on Reducing Yarn Forming Neps

An Investigation into Reducing the Spindle Acceleration Energy Consumption of Machine Tools

Numerical simulation of the three-dimensional flow field in four pneumatic compact spinning using the Finite Element Method

Enhancing the Spun Yarn Properties by Controlling Fiber Stress Distribution in the Spinning Triangle with Rotary Heterogeneous Contact Surfaces

Mixed-Framework-Based Energy Optimization of Chemi-Mechanical Pulping

Reduce the Spindle Fabrication Cost Using Knurling Technology

Sensitivity analysis-based quality optimization strategy for multi-correlation parameters in spinning process

An important measure for improving the spinnability of PET melt direct spinning

Numerical Study of Melt-Spinning Dynamic Parameters and Microstructure Development with Ongoing Crystallization

Compact spinning: a comprehensive review of the revolution in yarn manufacturing

Research on wearing behavior of fibers in a rotor by numerical simulation and experimental verification

Effects of spinning parameters on microstructures of ellipsoidal heads during marginal-restraint mandrel-free spinning

STUDY ON BENEFITS AND COSTS OF SPINNING RESERVE CAPACITY IN POWER MARKET

Research on Spinnability of 55 Dtex/36 F Superfine Lobed PET/PA Composite DTT

Effects of structural parameters on air consumption and mechanical energy characteristics of airflow in the vortex spinning nozzle