Abstract:The central solenoid (CS) is one of the key components of the International Thermonuclear Experimental Reactor (ITER) tokamak and which is often considered as the heart of this fusion reactor. This solenoid will be built by using \(\hbox {Nb}_{3}\hbox {Sn}\) cable-in-conduit conductors (CICC), capable of generating a 13 T magnetic field. In order to assess the performance of the \(\hbox {Nb}_{3}\hbox {Sn}\) CICC in nearly the ITER condition, many short samples have been evaluated at the SULTAN test facility (the background magnetic field is of 10.85 T with the uniform length of 400 mm at 1% homogeneity) in Centre de Recherches en Physique des Plasma (CRPP). It is found that the samples with pseudo-long twist pitch (including baseline specimens) show a significant degradation in the current-sharing temperature (Tcs), while the qualification tests of all short twist pitch (STP) samples, which show no degradation versus electromagnetic cycling, even exhibits an increase of Tcs. This behavior was perfectly reproduced in the coil experiments at the central solenoid model coil (CSMC) facility last year. In this paper, the complex structure of the \(\hbox {Nb}_{3}\hbox {Sn}\) CICC would be simplified into a wire rope consisting of six petals and a cooling spiral. An analytical formula for the Tcs behavior as a function of the axial strain of the cable is presented. Based on this, the effects of twist pitch, axial and transverse stiffness, thermal mismatch, cycling number, magnetic distribution, etc., on the axial strain are discussed systematically. The calculated Tcs behavior with cycle number show consistency with the previous experimental results qualitatively and quantitatively. Lastly, we focus on the relationship between Tcs and axial strain of the cable, and we conclude that the Tcs behavior caused by electromagnetic cycles is determined by the cable axial strain. Once the cable is in a compression situation, this compression strain and its accumulation would lead to the Tcs degradation. The experimental observation of the Tcs enhancement in the CS STP samples should be considered as a contribution of the shorter length of the high field zone in SULTAN and CSMC devices, as well as the tight cable structure.

Analysis Of Stability Margin On Cryogenic Parameters And Transient Disturbance In Cable-In-Conduit Nb3sn Conductors

Analysis on stability margin of Nb/sub 3/Sn Cable-in-Conduit-Conductor

Numerical Analysis of Stability Margin and Quench Behavior of Cable-in-conduit NbTi Conductors for KSTAR

Stability Analysis of the Kstar Pf Busline

Numerical Investigation on Transverse Heat Transfer Properties in Cross Section of Full Size Nb3Sn CICC ITER Conductor

Stability Analysis on Nb3Sn Sample Conductor of CFETR Central Solenoid Model Coil

Thermal-Hydraulic Analysis On Kstar Superconducting Magnets

Theoretical Analysis for the Mechanical Behavior Caused by an Electromagnetic Cycle in ITER $$\hbox {nb}_{3}\hbox {sn}$$ Nb 3 Sn Cable-in-conduit Conductors

Influence of Inlet Pressure and Mass Flow Rate on the Temperature Rise of Superconducting Strands in SSTF under the Normal Operating Conditions [of KSTAR]

Moving Mesh Application for Thermal-Hydraulic Analysis in Cable-in-conduit-conductors of KSTAR Superconducting Magnet

DC Performance Measurement and Assessment of Nb 3 Sn Cable-In-Conduit Conductor for CFETR CS Model Coil

Theoretical analysis for the mechanical behavior caused by an electromagnetic cycle in ITER Nb_3Sn cable-in-conduit conductors

Parametric Study for Conductor Design of KSTAR PF Coils

Transient Operating Characteristics for the KSTAR TF Superconducting Magnet

Stability Analysis for Cryocooled Aluminum-Stabilized Superconducting Magnet

Thermohydraulic Behaviors of Kstar Pf Superconducting Magnet System in Operation

ANALYSIS OF OPERATING CHARACTERISTICS IN KSTAR PF COILS SYSTEM UNDER SINGLE AND CONTINUOUS PLASMA DISCHARGING CONDICTIONS

Ac Losses and Heat Removal in Three-Dimensional Winding Pack of Samsung Superconducting Test Facility under Pulsed Magnetic Field Operation

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

Influence of Inter-Strand Electrical and Thermal Conductivity on Stability of Rutherford Cables in Accelerator Magnets