Fabrication of β-tricalcium phosphate composite ceramic sphere-based scaffolds with hierarchical pore structure for bone regeneration
Fupo He,Guowen Qian,Weiwei Ren,Jiyan Li,Peirong Fan,Haishan Shi,Xuetao Shi,Xin Deng,Shanghua Wu,Jiandong Ye
DOI: https://doi.org/10.1088/1758-5090/aa6a62
2017-01-01
Biofabrication
Abstract:Polymer sphere-based scaffolds, which are prepared by bonding the adjacent spheres via sintering the randomly packed spheres, feature uniform pore structure, full three-dimensional (3D) interconnection, and considerable mechanical strength. However, bioceramic sphere-based scaffolds fabricated by this method have never been reported. Due to high melting temperature of bioceramic, only limited diffusion rate can be achieved when sintering the bioceramic spheres, which is far from enough to form robust bonding between spheres. In the present study, for the first time we fabricated 3D interconnected beta-tricalcium phosphate ceramic sphere-based (PG/TCP) scaffolds by introducing phosphate-based glass (PG) as sintering additive and placing uniaxial pressure during the sintering process. The sintering mechanism of PG/TCP scaffolds was unveiled. The PG/TCP scaffolds had hierarchical pore structure, which was composed by interconnected macropores (>200 mu m) among spheres, pores (20-120 mu m) in the interior of spheres, and micropores (1-3 mu m) among the grains. During the sintering process, partial PG reacted with beta-TCP, forming beta-Ca2P2O7; metal ions from PG substituted to Ca2+ sites of beta-TCP. The mechanical properties (compressive strength 2.8-10.6 MPa; compressive modulus 190-620 MPa) and porosity (30%-50%) of scaffolds could be tailored by manipulating the sintering temperatures. The introduction of PG accelerated in vitro degradation of scaffolds, and the PG/TCP scaffolds showed good cytocompatibility. This work may offer a new strategy to prepare bioceramic scaffolds with satisfactory physicochemical properties for application in bone regeneration.