Abstract:Computational modelling for microchannel reactor design was performed to investigate the effects of various factors on the efficiency and performance of an autothermal reforming system. The yield and productivity from the chemical process were determined by performing computational fluid dynamics and thermodynamic analysis. Strength and weakness were assessed under different reaction conditions. Design recommendations were provided and operation strategies were mapped out. The results indicated that operation at millisecond contact times is feasible, but optimisation of reaction conditions is necessary to balance efficiency and performance. The conversion to hydrogen is influenced greatly by the feed composition, which must be controlled precisely within certain needed limits to maximize the yield and productivity from the process while avoiding the problems of combustion or explosion. Additionally, the efficiency difference between feed compositions is determined by thermodynamic analysis. The pressure and flow rate set strict limits on operation, and there is a trade-off between high productivity and low conversion. The pressure and flow rate play competing roles in reactor operation. Lower pressures and flow rates can increase the conversion and yield, but higher pressures and flow rates can significantly improve the hydrogen productivity and output power, which is essential to the success of start-up and acceleration of the downstream equipment. There may exist an optimum pressure and flow rate in terms of both efficiency and performance. Output power in excess of 6000 kW per cubic meter can be achieved by the system.

Modeling Of Ethyl Acetate Hydrogenation Reactor

Modeling of ethyl acetate hydrogenation reactor

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Experiments and Kinetic Modeling of Fructose Dehydration to 5-Hydroxymethylfurfural with Hydrochloric Acid in Acetone-Water Solvent

The Intrinsic Kinetics of Ethyl Acetate Hydrogenation to Ethanol

The Macro-Kinetics of Ethyl Acetate Hydrogenation to Ethanol

Modeling and simulation of an integrated bioethanol-hydrogen production process

Dynamic simulation and control of acetylene hydrogenation reactor in ethylene plant

Hybrid Model of Multimodal Based on Data Enhancement and Lumped Reaction Kinetics: Applying to Industrial Ebullated-Bed Residue Hydrogenation Unit

Adaptive Control Design for Hydrogen Production Via Autothermal Reforming of Methanol

STUDY ON THE ACETYLENE HYDROGENATION PROCESS FOR ETHYLENE PRODUCTION: SIMULATION, MODIFICATION, AND OPTIMIZATION

Modeling of esterification process in industrial poly (ethylene terephthalate) plant based on kinetic mechanism

Modeling and Simulation of a Three Phase Fixed Bed Catalytic Reactor for the Hydrogenation of 2-ethyl-hexenal

Study on the kinetics of acetic acid hydrogenation to ethanol

Modeling and Optimization for Industrial Adipic Acid Synthesis Reactors

Computational modelling of methanol autothermal reforming phenomena in microchannel reactors for hydrogen production

Study on Hydrolysis of Methyl Acetate in A Catalytic Distillation Column

Intensification and performance assessment of ethanol production process by hydrogenation of methyl acetate

Kinetic Study on Esterification of Acetic Acid with Isopropyl Alcohol Catalyzed by Ion Exchange Resin

Research on industrial modeling of ethylene oxide hydration reactor