A Facile Route to Prepare Mesoporous Anatase Tio2 Nanotubes Assembly

Wugang Fan,Lian Gao

DOI: https://doi.org/10.1246/cl.2006.670

2006-01-01

Chemistry Letters

Abstract:Anatase TiO2 nanotube assembly was prepared by vaporphase method using carbon nanotubes as template. Large surface area and mesoporous structure of the product favor the applications in gas sensing and photocatalysis.

What problem does this paper attempt to address?

Rapid-Heating-Triggered in Situ Solid-State Transformation of Amorphous TiO2 Nanotubes into Well-Defined Anatase Nanocrystals

Zhonghui Gao,Ying Zhao,Haifeng Wang,Yun Wang,Lixue Jiang,Yiming Xu,Baixiang Xu,Lirong Zheng,Chuanhong Jin,Porun Liu,Huagui Yang,Huijun Zhao,Xianjin Yang,Yunhui Huang

DOI: https://doi.org/10.1021/acs.cgd.8b01604

IF: 4.01

2019-01-01

Crystal Growth & Design

Abstract:Fabrication of nanocrystals from their disordered solid-state precursors represents a new synthetic strategy. Compared to the widely used chemical vapor deposition and wet-chemistry based methods employing gas and liquid phased precursors, the solid-state transformation of disordered solid precursors to highly ordered crystals is a great challenge due to the severely restricted mass transport and inadequate structural directing mechanism. Herein, we report a rapid-heating-triggered in situ solid-state crystal growth method capable of transforming amorphous TiO2 nanotubes into anatase nanocrystals with well-defined facets and uniform sizes within a minute. The results obtained from in situ transmission electron microscopy and three-dimensional phase-field simulation indicate that the basic building blocks are formed through mechanical rupture of an amorphous TiO2 nanotube precursor, followed by an enhanced diffusion and concomitant oriented attachment onto TiO2 crystal nuclei mediated by the fluorine species evolved from the rapid heating. The unique crystal growth demonstrated in this work provides an alternative synthetic means for fabrication of other nanocrystals from solid-state precursors.
A facile solution route to deposit TiO2 nanowire arrays on arbitrary substrates.

Bo Li,Jin-Ming Wu,Tao-Tao Guo,Ming-Zao Tang,Wei Wen

DOI: https://doi.org/10.1039/c3nr05786k

IF: 6.7

2014-01-01

Nanoscale

Abstract:A facile solution-based technique was developed to grow vertically aligned TiO2 nanowires with predominantly anatase phase on arbitrary substrates of stainless steel, glass, silicon wafer and carbon cloth at the low temperature of 80 degrees C and in an open atmosphere.
Anatase TiO2‐Coated Multi‐Wall Carbon Nanotubes with the Vapor Phase Method

WG Fan,L Gao,J Sun

DOI: https://doi.org/10.1111/j.1551-2916.2005.00755.x

IF: 4.186

2006-01-01

Journal of the American Ceramic Society

Abstract:The vapor phase method was introduced for preparing anatase TiO 2 ‐coated multi‐wall carbon nanotubes. A sample uniformly covered with a thick layer of TiO 2 ranging from 20 to 50 nm was obtained. Compared with the commonly used hydrothermal system, this technique is of interest for easy control of a precursor containing Ti and a distinct coating process. We anticipate that this new hybrid carbon nanotubes material will find applications as photocatalysts and sensors.
Large-scale Synthesis and Characterization of Fan-Shaped Rutile TiO2 Nanostructures

Miaomiao Ye,Zhonglin Chen,Wenshou Wang,Liang Zhen,Jimin Shen

DOI: https://doi.org/10.1016/j.matlet.2008.03.019

IF: 3

2008-01-01

Materials Letters

Abstract:Large-scale fan-shaped rutile TiO2 nanostructures have been synthesized by means of a simple hydrothermal method using only TiCl4 as titanium source and chloroform/water as solvents. The physicochemical features of the fan-shaped TiO2 nanostructures are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), nitrogen absorption-desorption, diffuse reflectance ultraviolet-visible spectroscopy (UV-vis) and Fourier transform infrared spectroscopy (FTIR). Structural characterization indicates that the fan-shaped TiO2 nanostructures are composed of several TiO2 nanorods with diameters of about 5 nm and lengths of 300-350 nm. The average pore size and BET surface area of the fan-shaped TiO2 nanostructures are 6.2 nm and 59 m(2)/g, respectively. Optical adsorption investigation shows that the fan-shaped TiO2 nanostructures possess optical band gap energy of 3.11 eV. (C) 2008 Elsevier B.V. All rights reserved.
Fabrication of mesoporous titanium oxide nanotubes based on layer-by-layer assembly.

Sufen Ai,Qiang He,Ying Tian,Junbai Li

DOI: https://doi.org/10.1166/jnn.2007.448

2007-01-01

Journal of Nanoscience and Nanotechnology

Abstract:Titanium oxide (TiO2)/polyacrylic acid (PAA) composite nanotubes were firstly fabricated through the sol-gel process of titanium alkoxide in the inner pores of alumina template followed layer-by-layer assembly with polyacrylic acid (PAA). Mesoporous TiO2 nanotubes could be obtained after the removal of PAA component by calcination and etching of the template with concentrated sodium hydroxide aqueous solution. The surface area of as-prepared porous TiO2 nanotubes was measured as twice larger than that of the conventional TiO2 nanotubes and the pore diameter in the wall of the tubes is several nanometers. Such assembled mesoporous nanotubes can serve as carriers for catalysis release and biomolecules.
A Facile Route for Spraying Preparation of Pt/TiO2 Monolithic Catalysts Toward VOCs Combustion

Xiao Chen,Zhenglong Zhao,Ying Zhou,Qiulian Zhu,Zhiyan Pan,Hanfeng Lu

DOI: https://doi.org/10.1016/j.apcata.2018.08.025

IF: 5.723

2018-01-01

Applied Catalysis A General

Abstract:This study presents an efficient, economic, and simple preparation strategy for Pt/TiO2 monolith catalysts. Nano-Pt/TiO2 dispersion liquid with good activity and stability was synthesized by hydrolysis and chemical reduction method. Various Pt/TiO2 monolithic catalysts were prepared by spraying the dispersion liquid on different substrates. Results of transmission electron microscopy, scanning electron microscopy, N-2 adsorption-desorption, H-2 temperature-programmed and CO oxidation showed that the Pt/TiO2 nanoparticles with good mesoporous structure and redox properties were highly dispersed on the substrate. The as-prepared 0.5 Pt/TiO2 cordierite monolithic catalyst with 0.1 wt%s Pt content exhibited excellent catalytic combustion activity (T-90 of toluene combustion was 212 degrees C), stability (no deactivation was observed during a 120 h test) and firmness (mass loss was 0.11% after 1 h ultrasonic vibration) under experimental conditions. Compared with state-of-the-art methods, this method is more suitable for large-scale production of waste-gas-treated monolith catalysts. And this method meets the concept of energy saving and emission reduction because of its simplicity, high efficiency, environmental friendliness, and high utilization of active components.
A facile synthesis of hierarchical TiO2 for dye adsorption and photocatalysis

lulu lai,jinming wu

DOI: https://doi.org/10.1039/c4ra04790g

IF: 4.036

2014-01-01

RSC Advances

Abstract:Hierarchical flower-like H2Ti5O11 center dot 3H(2)O assembled with radial nanowires was fabricated via a template-free solution-based reaction, and was converted to TiO2 with distinct phases and morphologies by the subsequent acid-treating or annealing. The HCl treatment achieved the controllable conversion from titanate nanowires to rutile nanorods by varying the temperature and acidity. When compared with the as-synthesized titanate nanowires and the thoroughly transformed rutile nanorods, their mixtures were found to exhibit the best dye adsorption ability towards rhodamine B and methylene blue in water. The H2Ti5O11 center dot 3H(2)O nanowires decomposed in sequence to anatase and rutile after a subsequent calcination in air, via an intermediate phase of H2Ti4O9 center dot H2O. The hierarchical structure could be retained up to 800 degrees C. When utilized as photocatalysts to degrade rhodamine B in water, the 550 degrees C-calcinated powder, with mixed phases of anatase, rutile, and srilankite, demonstrated the highest photocatalytic activity.
Templated Synthesis of TiO2 Nanotube Macrostructures and Their Photocatalytic Properties

Hongbian Li,Qiaoyu Zhou,Yuntian Gao,Xuchun Gui,Long Yang,Mingde Du,Enzheng Shi,Jidong Shi,Anyuan Cao,Ying Fang

DOI: https://doi.org/10.1007/s12274-014-0571-3

IF: 9.9

2014-01-01

Nano Research

Abstract:Controlled synthesis of hierarchically assembled titanium dioxide (TiO2) nanostructures is important for practical applications in environmental purification and solar energy conversion. We present here the fabrication of interconnected TiO2 nanotubes as a macroscopic bulk material by using a porous carbon nanotube (CNT) sponge as a template. The basic idea is to uniformly coat an amorphous titania layer onto the CNT surface by the infiltration of a TiO2 precursor into the sponge followed by a subsequent hydrolysis process. After calcination, the CNTs are completely removed and the titania is simultaneously crystallized, which results in a porous macrostructure composed of interconnected anatase TiO2 nanotubes. The TiO2 nanotube macrostructures show comparable photocatalytic activities to commercial products (AEROXIDE TiO2 P25) for the degradation of rhodamine B (RhB). Moreover, the TiO2 nanotube macrostructures can be settled and separated from water within 12 h after photocatalysis, whereas P25 remains suspended in solution after weeks. Thus the TiO2 nanotube macrostructures offer the advantage of easy catalyst separation and recycle and can be a promising candidate for wastewater treatment.
A Simple Solution-Phase Route for Room-Temperature Synthesis of Mesoporous and Nanocrystalline Anatase Tio2

Jingpeng Li,Yuhe Chen,Zaixing Wu,Yongjie Bao,Sheng He,Neng Li,Chengjian Huang,Zhangmin Chen,Yun Lu

DOI: https://doi.org/10.1080/15533174.2016.1157821

2016-01-01

Inorganic and Nano-Metal Chemistry

Abstract:A simple solution-phase route to synthesize mesoporous anatase TiO2 nanocrystallites at room temperature was presented. TiO2 nanocrystallites were prepared via a unique hydrolysis of titanium complexes in the presence of H3BO3. The mean size of the as-obtained TiO2 nanocrystallite was in about 10 nm. They possess large surface area of 48.6 m(2) g(-1) and the dominant pore size of 4.3 nm. The effect of aging time on crystallinity was studied. For crystallization occurred at room temperature, the longer the aging time is, the greater the crystallinity is.
A facile method for rapid preparation of individual titania nanotube powders by a two-step process

Yulong Liao,Wenxiu Que,Jin Zhang,Peng Zhong,Yucheng He

DOI: https://doi.org/10.1016/j.materresbull.2010.12.018

IF: 5.6

2011-01-01

Materials Research Bulletin

Abstract:Present study reports a facile method for preparing individual TiO2 nanotube (NT) powders by a two-step process, which includes that TiO2 NT bundles are rapidly synthesized by an electro-chemical process in perchlorate-containing electrolyte and then they are disaggregated into individual TiO2 NT powders under an assistance of ultrasonic oscillation treatment. Morphological and microstructural properties of the individual TiO2 NT powders are characterized by field emission scanning electron microscopy and transmission electron microscopy. Results indicate that the individual TiO2 NT powders, which have an outer diameter of about 20nm and an inner diameter of 10nm, can be easily obtained from the disaggregation of the TiO2 NT-bundles by combining the electrochemical process with the physical processing. Furthermore, the individual TiO2 NT powders exhibit higher photocatalytic activity than the TiO2 NT-bundle powders.
Preparation of Large-Pore Mesoporous Nanocrystalline TiO2 Thin Films with Tailored Pore Diameters

Kesong Liu,Honggang Fu,Keying Shi,Fengshou Xiao,Liqiang Jing,Baifu Xin

DOI: https://doi.org/10.1021/jp054546p

IF: 3.466

2005-01-01

The Journal of Physical Chemistry B

Abstract:A novel and facile synthesis route to large-pore mesoporous nanocrystalline anatase thin films with tunable pore diameters in narrow distribution of sizes ranging from 8.3 to 14 nm is reported, using triblock copolymer as the template and Ti(OBun)4 as the inorganic precursor. The obtained materials were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption. A reasonable formation mechanism is also presented in this work.
Thoroughly Mesoporous Tio2 Nanotubes Prepared by A Foaming Agent-Assisted Electrospun Template for Photocatalytic Applications

Y. Lv,Z. L. Xu,H. Asai,N. Shimada,K. Nakane

DOI: https://doi.org/10.1039/c6ra00241b

IF: 4.036

2016-01-01

RSC Advances

Abstract:A thoroughly mesoporous long TiO2 nanotube with intact morphology was firstly prepared using a foaming agent-assisted electrospun template method for photocatalytic applications.
A Facile Route to Synthesis of Double-Sided TiO2 Nanotube Arrays for Photocatalytic Activity

YiKun Li,Jujun Yuan,Shiyong Gao,Lin Li,Shujie Jiao,Yimin Jin,Hongtao Li,Jinzhong Wang,Qingjiang Yu,Yong Zhang

DOI: https://doi.org/10.1007/s10854-016-5544-8

2016-01-01

Journal of Materials Science Materials in Electronics

Abstract:TiO2-based structure is fabricated on both sides of transparent quartz substrate via a liquid phase deposition method, with the assistance of ZnO nanorod template. The morphology, crystal structure, and photocatalytic property of the double-sided TiO2 nanotube arrays have been studied and the formation mechanism has been discussed. Importantly, compared to single-sided structure, the double-sided TiO2 nanotube arrays show remarkable enhancement of photocatalytic activity in degradation of Rhodamine B.
Facile Preparation of Hierarchical Titanium Silicalite-1 (TS-1) with Efficient Oxidation of Cyclic Alkenes Using PVA Modified MWCNTs As Templates

Qi Du,Yiping Guo,Huanan Duan,Hua Li,Yujie Chen,Hafeez Ur Rehman,Hezhou Liu

DOI: https://doi.org/10.1016/j.jallcom.2016.12.382

IF: 6.2

2016-01-01

Journal of Alloys and Compounds

Abstract:Hierarchical TS-1 (HTS-1) with highly connective mesoporous channels has been successfully synthesized through a simple one-pot method using polyvinyl alcohol (PVA) modified multi-wall carbon nanotubes as templates. The synthesized samples are characterized by X-ray diffraction, UV-vis spectra, scanning electron microscopy, transmission electron microscopy, FT-IR spectra and N-2 adsorption/desorption. The HTS-1 contains rich intracrystalline mesopores (10-20 nm) and a large amount of open channels, which shows much better catalytic activity than conventional TS-1 in the epoxidation of cyclohexene and cyclooctene. Meanwhile, the introduction of PVA triggers the size of HTS-1 increase from similar to 230 nm to similar to 380 nm, which is also beneficial for the separation of nanosized zeolite crystals from the reaction products. (C) 2016 Elsevier B.V. All rights reserved.
In Situ Templated Synthesis of Anatase Single-Crystal Nanotube Arrays.

JL Zhao,XH Wang,TY Sun,LT Li

DOI: https://doi.org/10.1088/0957-4484/16/10/077

IF: 3.5

2005-01-01

Nanotechnology

Abstract:Anatase single-crystal nanotubes were obtained using an in situ templated method. First, highly ordered titania arrays were formed through an anodization process in H3PO4 electrolytes containing 0.5 wt% HE Under optimized conditions titania nanotubes with a diameter of up to 100 nm and a length of up to 1.1 mu m were prepared. Second, the crystallization and stability of the titania nanotubes were studied in air at elevated temperatures. Anatase single-crystal nanotubes were fabricated after annealing the sample in air at 450 degrees C. The anatase single-crystal structure was verified by selected area diffraction pattern and HRTEM images.
Preparation and Photocatalytic Activity of TiO2 Nanotube Powders Derived by a Rapid Anodization Process

Yulong Liao,Wenxiu Que

DOI: https://doi.org/10.1016/j.jallcom.2010.06.038

IF: 6.2

2010-01-01

Journal of Alloys and Compounds

Abstract:TiO2 nanotube powders as a photocatalyst for water processing were prepared by a rapid anodization process in a perchlorate containing electrolyte. Morphological and micro-structural properties of the TiO2 nanotube powders were carefully characterized. Results indicate that the TiO2 nanotubes with high aspect ratio, perfect tubular architecture, and smooth surface were successfully synthesized by a one-step electrochemical process. It is also noted that the nanotubes grow rather rapidly and well ordered in bundles with about 3μm in length, 15nm in outer diameter, and 10nm in inner diameter. Effects of synthesis temperature of water bath on the morphological properties of the TiO2 nanotubes were also studied, and a crystalline transformation process from amorphous to anatase then to rutile was revealed as the annealing temperature rises. Methyl orange was taken as a model compound to confirm the photocatalytic activities of the as-synthesized TiO2 nanotube powders with different crystal structures. It is found that when annealed at 550°C, the TiO2 nanotube powders with a mixing phase structure of anatase and rutile have the best photocatalytic degradation activity for the methyl orange aqueous solution.
Synthesis of carbon nanotube/anatase titania composites by a combination of solgel and self-assembly at low temperature

Changyuan Hu,Rongfa Zhang,Junhuai Xiang,Tingzhi Liu,Wenkui Li,Mingsheng Li,Shuwang Duo,Fei Wei

DOI: https://doi.org/10.1016/j.jssc.2011.03.040

IF: 3.3

2011-01-01

Journal of Solid State Chemistry

Abstract:A simple method is described for the synthesis of carbon nanotube/anatase titania composites by a combination of a sol–gel method with a self-assembly technique at 65°C. This method makes use of polyelectrolyte for wrapping multi-walled carbon nanotube (MWCNT) and providing them with adsorption sites for electrostatically driven TiO2 nanoparticle deposition. The composites were characterized using X-ray diffraction, transmission electron microscopy, Fourier transform infrared and X-ray photoelectron spectroscopy, and photoluminescence for analyzing their crystal phase, microstructure, particle size, and other physicochemical properties. The results showed that MWCNT were covered with an anatase TiO2 thin layer or surrounded by an anatase TiO2 thick coating, which is constructed of TiO2 particles about 6nm in size. The composites were rich in surface hydroxyl groups. The excited e− in conduction band of TiO2 may migrate to MWCNT. Concerning the potential applicability, MWCNT/TiO2 composites showed excellent photocatalytic activity toward the photodegradation of methyl orange.
Facile Preparation of Micro-Mesoporous Carbon-Doped TiO2 Photocatalysts with Anatase Crystalline Walls under Template-Free Condition.

De-en Gu,Yun Lu,Bang-chao Yang,Yong-da Hu

DOI: https://doi.org/10.1039/b800596f

IF: 4.9

2008-01-01

Chemical Communications

Abstract:A new low-temperature procedure has been used for preparing micro-mesoporous carbon-doped TiO2 photocatalysts, with anatase pore wall and substitutional carbon occupying oxygen sites, which exhibit outstanding photocatalytic activity under visible light irradiation.
Simple preparation of sub-micron mesoporous TiO2 spheres consisting of anatase nanocrystals

Sheng Li,Qianhong Shen,Jianjuan Zong,Hui Yang

DOI: https://doi.org/10.1016/j.jallcom.2010.04.246

IF: 6.2

2010-01-01

Journal of Alloys and Compounds

Abstract:Mesoporous anatase titania spheres with an average size of approx. 400nm were facilely prepared at low temperature by treating the titanium glycolate precursor spheres with hot water (∼100°C). The surface of the precursor particle became rough and the anatase phase began to form when it was treated with hot water for 1.5h. With increasing treatment time, the crystallinity of the particles was improved, and the nanoporous structure further formed in the interior of the spheres. When the treatment time was prolonged to 6h, the mesoporous anatase spheres were finally obtained, and they were composed of interconnected nanocrystals with the size less than 15nm and pores with the mean size of 8.31nm. The as-prepared mesoporous anatase titania spheres exhibited excellent adsorption capacity and better photocatalytic activity compared with the commercial photocatalyst P-25 due to the large specific surface area. Ostwald ripening and surface energy effects were presumed to play an important role in the formation of mesoporous structure and anatase nanocrystals.
Porous TiO2 Nanowires Derived from Nanotubes: Synthesis, Characterzation and Their Enhanced Photocatalytic Properties

Zhen Jin,Fan-Li Meng,Yong Jia,Tao Luo,Jin-Yun Liu,Bai Sun,Jin Wang,Jin-Huai Liu,Xing-Jiu Huang

DOI: https://doi.org/10.1016/j.micromeso.2013.07.006

IF: 5.876

2013-01-01

Microporous and Mesoporous Materials

Abstract:Anatase porous TiO2 nanowires were synthesized via simple in situ hydrothermal treatment of the amorphous anodic TiO2 nanotubes in urea aqueous solution at 70 degrees C. The morphology transformation process was also analyzed so that hydroxide induced dissolution-recrystallization mechanism was proposed. Due to the coarse surface and porous structure, the porous TiO2 nanowires possess a large surface area of 267.56 m(2) g(-1), which is almost 4 times higher than that of amorphous anodic TiO2 nanotubes. The photocatalytic properties of the porous TiO2 nanowires towards MB, phenol and Rhodamine 6G were investigated. The porous TiO2 nanowires display better photocatalytic activity than that of TiO2 nanotubes or Degussa P25. The enhanced photocatalytic activity is attributed to the porous structure and the large specific surface area. Such porous TiO2 nanowires maybe considered as an ideal photocatalyst for the rapid photodegradation of organic pollutant in water. Furthermore, this facile, low-cost and environmentally friendly method is highly expected to innovate the design and fabrication of highly photoactive porous TiO2 nanowires, which have potential applications in photocatalysis and solar energy conversion. (c) 2013 Published by Elsevier Inc.

A Facile Route to Prepare Mesoporous Anatase Tio2 Nanotubes Assembly

Rapid-Heating-Triggered in Situ Solid-State Transformation of Amorphous TiO2 Nanotubes into Well-Defined Anatase Nanocrystals

A facile solution route to deposit TiO2 nanowire arrays on arbitrary substrates.

Anatase TiO2‐Coated Multi‐Wall Carbon Nanotubes with the Vapor Phase Method

Large-scale Synthesis and Characterization of Fan-Shaped Rutile TiO2 Nanostructures

Fabrication of mesoporous titanium oxide nanotubes based on layer-by-layer assembly.

A Facile Route for Spraying Preparation of Pt/TiO2 Monolithic Catalysts Toward VOCs Combustion

A facile synthesis of hierarchical TiO2 for dye adsorption and photocatalysis

Templated Synthesis of TiO2 Nanotube Macrostructures and Their Photocatalytic Properties

A Simple Solution-Phase Route for Room-Temperature Synthesis of Mesoporous and Nanocrystalline Anatase Tio2

A facile method for rapid preparation of individual titania nanotube powders by a two-step process

Preparation of Large-Pore Mesoporous Nanocrystalline TiO2 Thin Films with Tailored Pore Diameters

Thoroughly Mesoporous Tio2 Nanotubes Prepared by A Foaming Agent-Assisted Electrospun Template for Photocatalytic Applications

A Facile Route to Synthesis of Double-Sided TiO2 Nanotube Arrays for Photocatalytic Activity

Facile Preparation of Hierarchical Titanium Silicalite-1 (TS-1) with Efficient Oxidation of Cyclic Alkenes Using PVA Modified MWCNTs As Templates

In Situ Templated Synthesis of Anatase Single-Crystal Nanotube Arrays.

Preparation and Photocatalytic Activity of TiO2 Nanotube Powders Derived by a Rapid Anodization Process

Synthesis of carbon nanotube/anatase titania composites by a combination of solgel and self-assembly at low temperature

Facile Preparation of Micro-Mesoporous Carbon-Doped TiO2 Photocatalysts with Anatase Crystalline Walls under Template-Free Condition.

Simple preparation of sub-micron mesoporous TiO2 spheres consisting of anatase nanocrystals

Porous TiO2 Nanowires Derived from Nanotubes: Synthesis, Characterzation and Their Enhanced Photocatalytic Properties