Abstract:A new method for online measurement of pulp Kappa number by means of near infrared diffuse reflectance spectroscopy and support vector machine (SVM) modeling has been developed in this paper. The near infrared diffuse reflectance spectroscopy of 45 Chinese red pine wood pulp samples was acquired. Selecting the absorption rates in 15 vibration absorption peaks of each sample and using dynamic independent component analysis (DICA) to distill the characters of input sample data, the pulp Kappa number predictive model based on SVM was built. From the whole 45 samples, 35 samples was selected to be the calibration set, and the predictive set consisted of the other 10 samples was used to validate the the pulp Kappa number predictive model. The external validation standard deviation is 0.26 for pulp Kappa number predictive model based on SVM, and the determining factor is 0.93 for the model. The internal cross validation standard deviation is 0.22 for pulp Kappa number predictive model based on SVM, and the determining factor is 0.96 for the model. To analyze the effectiveness of SVM method used to build the pulp Kappa number predictive model, the pulp Kappa number predictive model based on linear regression (LR) was also established. The external validation standard deviation is 0.45 for the model based on linear regression (LR), and the determining factor is 0.81 for the model. The internal cross validation standard deviation is 0.41 for the model based on linear regression (LR), and the determining factor is 0.85 for the model. For the 10 test samples, the pulp Kappa number predictive model based on Linear regression (LR) and the model based on SVM all have certain predictive accuracy, but the later higher. The experiment results not only show the feasibility and effectiveness of the near infrared measurement method for pulp Kappa number, but also validate that the pulp Kappa number predictive model based on SVM is more accurate and robust than linear regression model.

Prediction Model For Kappa Number In Whole Stalk Kenaf Kraft Pulping

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Oxygen Delignification of Kraft Pulp of Whole Stalk Kenaf

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

[The Online Measurement for Pulp Kappa Number Based on Near Infrared Spectroscopy and Support Vector Machine].

Monitoring the kappa number of bleached pulps based on FT-Raman spectroscopy

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Alkaline Peroxide Extrusion Pulping of Cotton Bast and Cotton Stalk

Optimization of Batch Cooking Parameters Based on SVM and Genetic Algorithm

Preliminary Study on Kenaf 637 Project

Surgery in coronary artery disease. I.

Relationship between the Change in E/T Ratio and the Cooking Performance of Eucalyptus and Acacia Woods during Kraft Pulping Process

Online prediction of the enzymatic hydrolysis efficiency of crop straw

Prediction of holocellulose and lignin content of pulp wood feedstock using near infrared spectroscopy and variable selection

Parameter calibration of the discrete element simulation model for soaking paddy loam soil based on the slump test

A Statistical Model To Evaluate Fiber Bending Flexibility

Advanced numerical kinetic model for predicting COD removal and optimisation of pulp and paper wastewater treatment by Fenton process

Balancing the effect of pretreatment severity on hemicellulose extraction and pulping performance during auto-hydrolysis prior to kraft pulping of acacia wood

Kinetics of Strong Acid Hydrolysis of a Bleached Kraft Pulp for Producing Cellulose Nanocrystals (Cncs)

Prediction Model of the Key Components for Lodging Resistance in Rapeseed Stalk Using Near-Infrared Reflectance Spectroscopy (NIRS)

Delignification of Sugarcane Bagasse with Alkali and Peracetic Acid and Characterization of the Pulp