Abstract:Tool wear and breakage is one of the biggest obstacles for developing the unattended CNC machining. Especially when cutting the difficult-to-machining materials, the tool wear will be more rapid and the tool breakage becomes more frequent, which makes an effective tool wear and breakage monitoring very urgent. In the paper, a physical model-based tool wear and breakage monitoring method is proposed. Firstly, a physical model of milling force with the influence of cutter runout and tool wear is established. The spindle box vibration and cutting torque of spindle drive system induced by milling force have been clarified theoretically. Then, through the measurements of milling force, spindle box vibration and driving current, a tool wear monitoring method by extracting the comprehensive feature from the seven-channel specific cutting force coefficients (SCFCs) has been presented. In the method, a multi-parameter decoupling identification procedure for the cutter runout, tooth wear loss and respective SCFCs has been clarified. The force homogenization effect of multi-tooth with tool wear is found. Moreover, an efficient tool breakage monitoring method is further put forward, which incorporates the amplitude ratios of multi-channel data to form an indicator for judging the occurrence of tool damage. The generation mechanism of the sudden distortion on signal waveform resulting from tool breakage is also explained. Finally, long-time milling experiments with multiple groups of machining parameters have been carried out on the general and heavy-cutting machine tools to verify the validity of the proposed method. The verification results indicate that the tool wear and breakage monitoring method can well estimate the cutting status of cutter. The study can provide a useful research basis for the potential industrial application of tool wear and breakage monitoring technology.

A New Method for the Prediction of Micro-milling Tool Breakage

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Online monitoring model of micro-milling force incorporating tool wear prediction process

Physical model-based tool wear and breakage monitoring in milling process

Theoretical Modeling and Experimental Study of Micro Milling Force Based on Tool Wear Mapping

Prediction of tool wear during micro-milling Inconel 718 based on long short-term memory network

Generic Cutting Force Modeling with Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Prediction of Nonlinear Micro-Milling Force with a Novel Minimum Uncut Chip Thickness Model

Simulation on the Wear of Micro Mill Cutter in Micro Milling

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Micro-Milling Tool Wear Monitoring via Nonlinear Cutting Force Model

A Comprehensive Micro-Milling Force Model for a Low-Stiffness Machining System

Modeling and Experimental Analysis of Microburr Formation Considering Tool Edge Radius and Tool-Tip Breakage in Microend Milling

Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry

Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718

Micro-milling of Fused Silica Based on Instantaneous Chip Thickness

Prediction of micro milling force and surface roughness considering size-dependent vibration of micro-end mill

Research on breakage characteristics in side milling of titanium alloy with cemented carbide end mill

Reliability analysis of micro milling accuracy based on flexible force model

Modeling of Three-Dimensional Cutting Forces in Micro-End-Milling