Abstract:Common cause failures (CCFs) may lead to the simultaneous unavailability or failure of numerous components in the nuclear power plant because of the existence of a shared cause when an initiating event disrupts the normal functioning of nuclear power plants. The presence of common cause failures (intra-unit and inter-unit) can be recognized in a multi-unit probabilistic safety assessment (MUPSA) as a crucial dependency factor that can influence accident scenarios and the core damage frequency (CDF), as CCF may affect the availability and proper operation of mitigating systems. Since such failures are likely to significantly undermine the benefits of the concept of redundancy in nuclear power plant systems, it is necessary to identify the CCFs that contribute to the core damage in a multi-unit site and analyse their overall quantitative magnitude and qualitative proportions. In this study, a twin-unit generic pressurized water reactor (PWR) nuclear plant is modeled using the AIMS-PSA software. For the loss-of-offsite-power (LOOP) and station blackout (SBO) events, the site CDF was calculated, and the cut-sets produced by this quantification were examined for the modeled CCF basic events in the fault trees. The quantitative and qualitative contributions of the CCFs to the frequency of site core damage were examined. CCFs in the modeled fault trees contributed to 4.58% to the site CDF of the combined LOOP followed by SBO event. In the LOOP event alone that leads to core damage, the CCF contributed 4.58% to the site CDF while CCFs contributed 17.19% to the site CDF in the SBO event alone that leads to core damage. With CCF events considered in the modeling process, the site CDF estimated with CCF events increased by 7.53% in the combined LOOP followed by SBO event. In the LOOP event alone that leads to core damage, inclusion of CCF events in the modeling increased the site CDF by 7.42%. A 15.66% increase in site CDF was recorded in the SBO event alone that leads to core damage as compared to modeling without CCF events. The results show how crucial the common cause failure contribution is to site CDF. The safety of the nuclear plant at a site is impacted by an increase in site CDF when common cause failures are considered. The various CCF fundamental event compositions and their percentage contributions were explicitly examined by the minimal cut-sets which leads to core damage in the units. In conclusion, this study's findings can help us better understand how CCFs increase multi-unit site risk and can also act as a starting point for future studies on the qualitative and quantitative categorizations of CCF effects within MUPSA.

Calculation of Core Damage Frequency Caused by Main Control Board Fire in the Main Control Room for Small Modular Reactors

Fault-Event Trees Based Probabilistic Safety Analysis of a Boiling Water Nuclear Reactor’s Core Meltdown and Minor Damage Frequencies

Uncertainty Analysis of Containment Dose Rate for Core Damage Assessment in Nuclear Power Plants

Fire simulation in the main control room of Bushehr nuclear power plant using CFAST software

Assessing the Impact of Common Cause Failures on Site Risk within Level 1 Multi-Unit PSA

Justification of fire protection measures in the NPP control room using CFD fire modeling

Application of NUREG/CR-6850 to the Fire Risk Quantification of a High Temperature Gas-Cooled Reactor

Numerical Study on the Fire Development Process of Typical Power Plant Multi-Floor Compartment

Discussion of Reactor Core Damage Probability under Condition of Multiple Reactor Years

Integrity Assessment of Cables Under Postulated Electrical Fire Accidents in a Zero-Power Research Reactor

Calculation analysis of a severe accident at a nuclear power plant with a sodium-cooled fast reactor

Multicomponent gas mixture parametric CFD study of condensation heat transfer in small modular reactor system safety

Further Discussion on Appropriate Interpretation of Core Damage Probability

The development of Petri net-based continuous Markov chain Monte Carlo methodology applying to dynamic probability risk assessment for multi-state resilience systems with repairable multi-component interdependency under longtermly thereat

RESEARCH ON MODEL ORDER REDUCTION FOR PREDICTING CORE DAMAGE FREQUENCY BASED ON RISMC METHOD

Accident source term and radiological consequences of a small modular reactor

Application of MC Method to Simulate Initiating Event Frequency of Loss of Equipment Cooling Water System in Nuclear Power Plants

Predictive model for local core melting accident caused by subassembly blockage in a fast reactor

Core Damage Assessment for Chinese 1000 MWe NPP under Severe Accident Conditions

Coupled AC 2 -CFD simulations for a high-pressure core melt accident scenario

Accident scenario analysis and control scheme design for a micro Molten Salt Reactor