Abstract:Due to the weak moderating capability of carbon dioxide itself, supercritical carbon dioxide cooled reactor typically has a hard energy spectrum and is susceptible to safety issues introduced by positive reactivity feedback in the event of LOCA (loss of coolant accident). In this paper, based on the energy spectrum characteristics of supercritical carbon dioxide reactor, a three-factor formula was proposed to describe the neutron circulation process. Based on the analysis of the threefactor formula, the effective fission neutron number and neutron utilization factor were refered as spectral terms in this study, while the probability of no leakage was referred as the leakage term. When studying the effect of moderator, fuel burnup, etc. on the void reactivity, the energy spectrum factor was mainly considered. When studying the effect of radial reflector material, high radial ratio, etc. on the void reactivity, the leakage factor was mainly considered, providing guidance for the core design of supercritical carbon dioxide reactors based on this theoretical basis. Using Monte Carlo simulation method, modeling, verification, and analysis were carried out for the supercritical carbon dioxide cooled reactor design proposed by MIT. The fuel assemblies of this reactor adopt a hexagonal annular fuel design, with the center of the assembly being the SCO2 coolant channel, which is separated from the MOX fuel by a cladding. A total of 265 fuel rod assemblies arranged in a hexagonal pattern make up a fuel component, and 562 fuel components (divided into three zones) and 21 control rod components arranged in a hexagonal pattern make up the reactor core active zone. Axial and radial reflector layers are set outside the active zone, and the outermost layer is a B4C absorber. The height of the active zone is 1.54 m, and the effective diameter is 4.81 m, with a height-to-diameter ratio of H/D=0.32 and a thermal power output of 2 400 MW. The results show that the design of supercritical carbon dioxide reactor needs to focus on the softening of energy spectrum and reasonable core geometry design. Using supercritical carbon dioxide as the radial reflector layer, in the event of LOCA, the carbon dioxide as the reflector and the carbon dioxide inside the core will leak simultaneously, and the increase in core leakage rate will lead to a decrease in void reactivity. Compared with other materials such as BeO, PbO, and SiO2, using a carbon dioxide reflector layer can better ensure the criticality of the core and improve neutron economy. However, due to the generally low neutron reflection ability of supercritical carbon dioxide itself, if the core has a large radial leakage due to a high core-to-diameter ratio, a thicker radial reflector layer is required, which may bring additional engineering difficulties and costs, requiring balance in the design. Setting moderators by partition can flatten the neutron flux, soften the energy spectrum, and reduce the reactivity introduced by LOCA.

Discussion of Reactor Core Damage Probability under Condition of Multiple Reactor Years

Further Discussion on Appropriate Interpretation of Core Damage Probability

Fault-Event Trees Based Probabilistic Safety Analysis of a Boiling Water Nuclear Reactor’s Core Meltdown and Minor Damage Frequencies

Uncertainty Analysis of Containment Dose Rate for Core Damage Assessment in Nuclear Power Plants

Core Damage Assessment for Chinese 1000 MWe NPP under Severe Accident Conditions

Preliminary analysis of maximum hypothetical accident for a solid core space nuclear reactor power system

Calculation of radiation damage of key components of CSNS II target station

Probabilistic assessment of the reactor vessel lifetime

Submersion criticality safety analysis of an in-core reactivity control structure for space gas-cooled reactor

Simulation Study on Defect Damage Behavior of Fe under Irradiation Environment

Study on Void Reactivity of Supercritical Carbon Dioxide Cooled Reactor

Global and regional probabilities of major nuclear reactor accidents

Relationship Between Fuel Reliability and I-131/I-133 in the Primary Coolant of CPR1000 PWRs

The development of Petri net-based continuous Markov chain Monte Carlo methodology applying to dynamic probability risk assessment for multi-state resilience systems with repairable multi-component interdependency under longtermly thereat

The effect of temperature variation on PCCS functional failure probability for AP1000 nuclear power plant

Research on condition assessment of nuclear power systems based on fault severity and fault harmfulness

Transient heat pipe failure accident analysis of a megawatt heat pipe cooled reactor

Burnup-Dependent Core Neutronics Analysis of Plate-Type Research Reactor Using Deterministic and Stochastic Methods

Calculating Physical Failure Probability of Htr-10'S Residual Heat Removal System by Response Surface Method

A Review for Modeling of Reactor Cores in Nuclear Power Plants

The Study of Continuous Core Zoning to Extend the Graphite Component Irradiation Lifespan in Molten Salt Reactor