Abstract:Using the end discharge of micro-rod-shaped electrode to scan layer by layer, micro-electrical discharge machining (EDM) can fabricate complex 3D micro-structures. During the machining process, the discharge state is broken frequently due to the wear of the tool electrode and the relative scanning motion. To keep a favorable discharge gap, the feed spindle of the tool electrode needs the characteristics of high-frequency response and high resolution. In this study, an experimental system with a macro/micro-dual-feed spindle was designed to improve the machining performance of servo scanning 3D micro-EDM (3D SSMEDM), which integrates an ultrasonic linear motor as the macro-drive and a piezoelectric (PZT) actuator as micro-feeding mechanism. Based on LabVIEW and Visual C++ software platform, a real-time control system was developed to control coordinately the dual-feed spindle to drive the tool electrode. The micro-feed motor controls the tool electrode to keep the favorable discharge gap, and the macro-drive motor realizes long working range by a macro/micro-feed conversion. The emphasis is paid on the process control of the 3D SSMEDM based on macro/micro-dual-feed spindle for higher machining accuracy and efficiency. A number of experiments were carried out to study the machining performance. According to the numerical control (NC) code, several typical 3D micro-structures have been machined on the P-doped silicon chips. Our study results show that the machining process is stable and the regular discharge ratio is higher. Based on our fundamental machining experiments, some better-machined effects have been gained as follows. By machining a micro-rectangle cavity (960μm×660μm), the machined depth error can be controlled within 2%, the XY dimensional error is within 1%, the surface roughness Ra reaches 0.37μm, and the material removal rate is about 1.58×104μm3/s by using a tool electrode of Φ=100μm in diameter. By machining multi-micro-triangle cavities (side length 700μm), it is known that the machining repeatability error is <0.7%.

A Linux Based Cnc System For Micro Electrical Machining

Development of Machining Simulation Module of Open CNC

CAD/CAM Integration System of 3D Micro EDM

Design of A Micro EDM Soft-CNC System Based on RTLinux

Reconstructing CNC platform for EDM machines towards smart manufacturing

Five-axis CNC system based on RT-Linux for electrical discharge grinding polycrystalline diamond tools

Development and Experimental Research on Sinking Electro-discharge Machining Numerical Control System

CAD/CAM System for Micro-EDM Slicing Milling

Servo scanning 3D micro-EDM based on macro/micro-dual-feed spindle

Design of Five-aixs CNC System for Electric Discharge Grinding (EDG) Polycrystalline Diamond (PCD) Tools

Analysis and Design of Cooperative Control Solutions for Electrical Systems of Laser CNC Machines

The Analysis for Real-Time Performance and Realization of CNC System on Middle-Convex and Varying Ellipse Piston Machining

Micro-electrochemical Machine Tool Used in Micro Parts Manufacturing

Design of an Integrative Nano-laser Micro-machining NC System

Development of a high precision tabletop versatile CNC wire-EDM for making intricate micro parts

Research on the Key Technologies of Micro Electro Discharge Machining

In-Situ Measurement and Distributed Computing for Adjustable CNC Machining

Development of CNC system of 7-axis EDM machine tool for drilling micro nozzles

Analysis and test of conductive shaft of large horizontal NC ECM machine tool

Micro Electro Discharge Machine with an Inchworm Type of Micro Feed Mechanism

Design and Fabrication of 3-Axes Mini CNC Milling Machine