Abstract:Modal parameters are inherent characteristics of civil structures. Due to the effect of environmental factors and ambient loads, the physical and modal characteristics of a structure tend to change over time. Therefore, the effective identification of time-varying modal parameters has become an essential topic. In this study, an instantaneous modal identification method based on an adaptive chirp mode decomposition (ACMD) technique was proposed. The ACMD technique is highly adaptable and can accurately estimate the instantaneous frequencies of a structure. However, it is important to highlight that an initial frequency value must be selected beforehand in ACMD. If the initial frequency is set incorrectly, the resulting instantaneous frequencies may lack accuracy. To address the aforementioned problem, the Welch power spectrum was initially developed to extract a high-resolution time–frequency distribution from the measured signals. Subsequently, the time–frequency ridge was identified based on the maximum energy position in the time–frequency distribution plot, with the frequencies associated with the time–frequency ridge serving as the initial frequencies. Based on the initial frequencies, the measured signals with multiple degrees of freedom could be decomposed into individual time-varying components with a single degree of freedom. Following that, the instantaneous frequencies of each time-varying component could be calculated directly. Subsequently, a sliding window principal component analysis (PCA) method was introduced to derive instantaneous mode shapes. Finally, vibration data collected under various operational scenarios were used to validate the proposed method. The results demonstrated the effective identification of time-varying modal parameters in real-world civil structures, without missing modes.

Arma (2,1) Model Based On Improved Emd For Structural Modal Parameter Identification

A Hybrid Method for Structural Modal Parameter Identification Based on IEMD/ARMA: A Numerical Study and Experimental Model Validation

Structural Modal Parameters Indentification Method Based on Improved EMD

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

STUDY ON THE MODAL PARAMETER IDENTIFICATION BASED ON IMPROVED EMD AND INDEPENDENT COMPONENT ANALYSIS

Structural modal identification through ensemble empirical modal decomposition

Application of EMMD in Modal Parameter Identification of Structures under Ambient Excitation

Bayesian FFT Modal Identification for Multi-setup Experimental Modal Analysis

Structural Modal Parameter Identification under Ambient Excitation Based on Extreme-point Symmetric Mode Decomposition

Modal Identification of Multi-Degree-of-freedom Structures Based on Intrinsic Chirp Component Decomposition Method

Operational Modal Analysis Using Correlation-Based Arma Models

Structural modal identification and MCMC-based model updating by a Bayesian approach

Modal identification based on Gaussian continuous time autoregressive moving average model

An Adaptive Chirp Mode Decomposition-Based Method for Modal Identification of Time-Varying Structures

Identification of Model Structure Parameters Via Combination of Afmm and Arx from Seismic Response Data

Extraction of Modal Parameters from Structural Acoustical Responses

Modal Parameter Identification of Time-Varying and Weakly Nonlinear Systems Based on an Improved Empirical Envelope Method

An Extended Modal Approach for Modal Parameter Identification of Structure under the Existence of Harmonic Excitations

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

Modal Parameter Estimation of Civil Structures Based on Improved Variational Mode Decomposition

A New Method for Modal Parameter Identification Based on Analytical Modal Decomposition and Hilbert Transformation