Abstract:To reduce carbon emissions associated with substantial concrete usage in construction and achieve the objectives of green and low-carbon construction, this study innovatively develops a low-carbon binary material by adding limestone powder (LP) and silica fume (SF) into the conventional cement-based material, enhancing the comprehensive utility value of LP. The experimental results show that the addition of 15% LP and 5% SF increases the yield stress of the mortar yet substantially reduces the plastic viscosity to 2.84 Nmm·min, representing a 44.5% decrease compared to pure cement slurry. This reduction is conducive to long-distance pumping of the cement-based material. Moreover, the addition of 5% SF compensates for the 18.8% (mid-stage, 28-d) and 15.8% (late-stage, 90-d) strength loss in mortar caused by LP while simultaneously improving the strength of the co-mixed system by 10.4% (mid-stage) and 10.8% (late-stage). In the early-stage measurements of the LP-SF binary cement-based materials, it is observed that while SF slightly increases the hydration heat release, LP suppresses the early hydration heat release. Therefore, the total heat release observed in the 15% LP and 5% SF group after 72 h is only 254 J/g, demonstrating favorable temperature control and crack prevention effects. In addition, X-ray diffraction (XRD) and thermogravimetric/differential thermogravimetric (TG/DTG) phase analysis reveal a notable increase of 53.56% in CH consumption. Besides, the weight loss on ignition of C-S-H crystals increases, indicating that the secondary hydration of LP and the pozzolanic reaction of SF promote the production of C-S-H in the system. Combined with the late-stage strength and water absorption characteristics, it is concluded that the system exhibits good mechanical properties and compactness. This study presents a use of mixed proportion that enables excellent mechanical properties, good pumping performance, and low hydration heat. Moreover, the analysis indicates that the carbon emission of each cubic meter of the as-developed mortar is reduced by approximately 16.7–23.9%, promoting the efficient and clean utilization of LP and SF.

Effects Of Lignosulfonate With Different Molecular Weight On The Workability Of High-Volume Fly Ash Cement Mortar

Effect of Cementitious Material Composition on the Performance of Low-Carbon Foamed Lightweight Soil

Effects of Particle Size Distribution of Fly Ash on Properties of Cement Mortar

Properties and acceleration mechanism of cement mortar added with low alkaline liquid state setting accelerator

High-Volume Mineral Admixtures Cement: The Effects of Particle Size Distribution

Investigation of Low-Calcium Circulating Fluidized Bed Fly Ash on the Mechanical Strength and Microstructure of Cement-Based Material

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Microstructure, strength development mechanism, and CO2 emission analyses of alkali-activated fly ash-slag mortars

Examining the early-stage performance and mechanical performance of limestone powder-silica fume binary cement-based materials

Study on the Effect of Foam Stability on the Properties of Foamed Lightweight Soils

Strength, Permeability and Multiscale Pore Characteristics of Cement-Based Materials with High-Volume Fly Ash Contents and Different Water-Binder Ratios

Modification mechanism of calcium lignosulfonate on cementing cement

Effect of Nano-SiO2/PVA Fiber on Sulfate Resistance of Cement Mortar Containing High-Volume Fly Ash

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

Effect of Mineral Admixtures on Physical, Mechanical, and Microstructural Properties of Flue Gas Desulfurization Gypsum-Based Self-Leveling Mortar

Study on the effect of mineral admixtures on working and mechanical properties of the grouting material

Study on the Properties of Dry-mixed Mortar Made of Limestone Tailings Mechanism Sand

Effect of Limestone Powder and Fly Ash on Magnesium Sulfate Resistance of Mortar

Effect of fly ash and gypsum on drying shrinkage and mechanical properties of one‐part alkali‐activated slag mortar

Effects of Sintering Temperature on the Characteristics of Lightweight Aggregate Made from Sewage Sludge and River Sediment

Effect of sewage sludge ash on mechanical properties, drying shrinkage and high-temperature resistance of cement mortar