Abstract:Due to the extremely low Reynolds number, the mixing of substances in laminar flow within microfluidic channels primarily relies on slow intermolecular diffusion, whereas various rapid reaction and detection requirements in lab-on-a-chip applications often necessitate the efficient mixing of fluids within short distances. This paper presents a magnetic pillar-shaped particle fabrication device capable of producing particles with planar shapes, which are then utilized to achieve the rapid mixing of multiple fluids within microchannels. During the particle fabrication process, a degassed PDMS chip provides self-priming capabilities, drawing in a UV-curable adhesive-containing magnetic powder and distributing it into distinct microwell structures. Subsequently, an external magnetic field is applied, and the chip is exposed to UV light, enabling the mass production of particles with specific magnetic properties through photo-curing. Without the need for external pumping, this chip-based device can fabricate hundreds of magnetic particles in less than 10 min. In contrast to most particle fabrication methods, the degassed PDMS approach enables self-priming and precise dispensing, allowing for precise control over particle shape and size. The fabricated dual-layer magnetic particles, featuring fan-shaped blades and disk-like structures, are placed within micromixing channels. By manipulating the magnetic field, the particles are driven into motion, altering the flow patterns to achieve fluid mixing. Under conditions where the Reynolds number in the chip ranges from 0.1 to 0.9, the mixing index for substances in aqueous solutions exceeds 0.9. In addition, experimental analyses of mixing efficiency for fluids with different viscosities, including 25 wt% and 50 wt% glycerol, reveal mixing indices exceeding 0.85, demonstrating the broad applicability of micromixers based on the rapid rotation of magnetic particles.

Fabrication of Magnetic Microfiltration Systems Using Soft Lithography

Manipulation of Magnetic Microbeads in Suspension Using Micromagnetic Systems Fabricated with Soft Lithography

Fabrication and Integration of Microscale Permanent Magnets for Particle Separation in Microfluidics

Microscale Magnetic Field Modulation Using Rapidly Patterned Soft Magnetic Microstructures

Microfluidic Separation of Magnetic Particles with Soft Magnetic Microstructures

Magnetic Beads Separation Characteristics of a Microfluidic Bioseparation Chip Based on Magnetophoresis with Lattice-Distributed Soft Magnets

Fabrication of Patterned Magnetic Particles in Microchannels and Their Application in Micromixers

Investigation on the Focusing and Separation of Polystyrene Microbeads in an Integrated Microfluidic System Using Magnetized Functionalized Flexible Micro-Magnet Arrays

Fabrication of NdFeB micromagnets based on vacuum negative pressure injection

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Fabrication Of Ferromagnetic Rolled-Up Microtubes For Magnetic Sensors On Fluids

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Fabrication and Characterization of Bonded NdFeB Microstructures for Microelectromechanical Systems Applications

Scalable high-throughput microfluidic separation of magnetic microparticles

A Novel Magnetic Chromatographic Microsystem

Enhancing Magnetic Micro- and Nanoparticle Separation with a Cost-Effective Microfluidic Device Fabricated by Laser Ablation of PMMA

3D-Printed Microfluidic Manipulation Device Integrated with Magnetic Array

A Naturally Inspired Extrusion‐based Microfluidic Approach for Manufacturing Tailorable Magnetic Soft Continuum Microrobotic Devices

Investigation of Wafer-Level Fabricated Permanent Micromagnets for MEMS

Rotating Magnetic Field-Controlled Fabrication of Magnetic Hydrogel with Spatially Disk-Like Microstructures

Fabrication of Ferromagnetic Nanoconstrictions by Electron Beam Lithography Using LOR/PMMA Bilayer Technique