Abstract:Solution-processed semiconductors have opened promising avenues for next-generation semiconductor and optoelectronic industries. Colloidal quantum dots (QDs) as one of the most typical materials are widely utilized for the design and development of light-emitting diodes, photodetectors, and solar cells. Recently, an emerging process of PbS QD ink has been employed to attain world record power conversion efficiency by surface passivation using a PbI2 ligand to form PbI2–PbS and the process optimization in the field of photovoltaics. However, the bonding and debonding of the ligands on the surface of PbS QDs are dynamic reversible processes in an ink environment. The uncoordinated Pb2+ defects induced by unbonded PbS QDs serve as the recombination sites. Thus, the present ink process leaves much room for the enhancement by surface passivation of PbS QDs. Herein, we devise an efficient strategy with a supplementary phenethylammonium iodide (PEAI) ligand for the formation of the PEAI–PbS interface in PbS QD ink-processed solar cells. This newly developed method can not only improve the passivation on the QD surface by iodine ions but also simultaneously enhance the carrier collection efficiency by a graded energy alignment between PbI2–PbS and PEAI–PbS layers. The corresponding power conversion efficiency of the optimized device has significantly increased by approximately 20% more than the control device. As a result, such a robust and efficient method regarded as a strategic candidate can overcome the bottleneck of imperfect passivation caused by a large specific surface area and loose bonding ligands, eventually promoting the industrial application of QDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c08135?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c08135</a>.Absorbance results, description for detailed testing conditions, TEM images of OA–PbS QDs, XPS spectra of QD films about I 3d signal, FTIR data for QD films, device performances of PbS QDs by different supplemental treatment condition (ligands/concentration/annealing temperature/immersing time/solvents), AFM images of control and PEAI-QD films, XRD of QD films, SEM image of control and PEAI-QD films, UPS of ZnO and EDT–PbS QD films, TA results of control and PEAI-QD films, EIS spectra of the photovoltaic devices, and device performance as a function of CQD film thickness (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08135/suppl_file/am0c08135_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Novel Hybrid Ligands for Passivating Pbs Colloidal Quantum Dots to Enhance the Performance of Solar Cells (vol 7, Pg 325, 2015)

Improved performance of colloidal CdSe quantum dot-sensitized solar cells by hybrid passivation.

Stable PbS quantum dot ink for efficient solar cells by solution-phase ligand engineering

Hybrid surface passivation of PbS/CdS quantum dots for efficient photoelectrochemical hydrogen generation

Hydroiodic Acid Additive Enhanced the Performance and Stability of PbS-QDs Solar Cells via Suppressing Hydroxyl Ligand

Probing and Controlling Surface Passivation of PbS Quantum Dot Solid for Improved Performance of Infrared Absorbing Solar Cells

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Merging Passivation in Synthesis Enabling the Lowest Open‐Circuit Voltage Loss for PbS Quantum Dot Solar Cells

Optimizing Surface Passivation of n‐Type Quantum Dots for Efficient PbS Quantum Dot Solar Cells

Reducing the Open-Circuit Voltage Loss of PbS Quantum Dot Solar Cells via Hybrid Ligand Exchange Treatment

Ligand-customized colloidal quantum dots for high-performance optoelectronic devices

In-situ surface patch-passivation via phosphorus oxygen bond for efficient PbS colloidal quantum dot infrared solar cells

Surface Ligand Management for Stable FAPbI3 Perovskite Quantum Dot Solar Cells

Tailoring Solvent-Mediated Ligand Exchange for CsPbI3 Perovskite Quantum Dot Solar Cells with Efficiency Exceeding 16.5%

Passivation Strategy of Reducing Both Electron and Hole Trap States for Achieving High-Efficiency PbS Quantum-Dot Solar Cells with Power Conversion Efficiency over 12%

Solution Annealing Induces Surface Chemical Reconstruction for High-Efficiency PbS Quantum Dot Solar Cells

Efficient and Stable PbS Quantum Dot Solar Cells by Triple-Cation Perovskite Passivation

Enhanced Passivation and Carrier Collection in Ink-Processed PbS Quantum Dot Solar Cells via a Supplementary Ligand Strategy

Solvent-Engineering-Assisted Ligand Exchange Strategy for High-Efficiency AgBiS2 Quantum Dot Solar Cells

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction

Regulating Thiol Ligands of P-Type Colloidal Quantum Dots for Efficient Infrared Solar Cells