Abstract:By utilizing the high gas permeability of polydimethylsiloxane (PDMS), a simple positive pressure-driven pumping method was introduced. The pump was an aerated PDMS with a central channel in it and packing with a transfusion bottle. It could be attached to the inlet of microfluidic chip using a Teflon tube to release the air into the microfluidic system and then to create a positive pressure for driving fluid. In comparison with the degas-based PDMS pump, positive pressure-driven PDMS pump offered increased system flexibility and reduced individual device fabrication complexity due to its independence and versatility. More importantly, it offered the advantages that the PDMS pump could be wrapped in transfusion bottles to meet the readily available requirements, and it also easily assembled, which only required the user use a Teflon tube to connect a PDMS pump and a microfluidic chip. This assembly provided great freedom to meet different pumping requirements. Furthermore, this PDMS pump could offer many possible configures of pumping power by adjusting the geometries of the pump or by combining different pump modules, the adjustment of pumping capacity was investigated. To help design pumps with a suitable pumping performance, the sealing effect, pumping pressure and flow rate were also investigated. The results indicated that the performance of the positive pressure-driven PDMS pump was reliable. Finally, we demonstrated the utility of this pumping method by applying it to a PDMS-based viscometer microfluidic chip.

A New Torque-Actuated Valve For Pdms Microfluidic Chip

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

The Pdms Micro Valve Driven by Pzt Piezoelectric Actuator on the Silicon Wafer

Reasearch and fabrication of integrated pneumatic microvalves in polymer microfluidic chip

Teflon-seated One-Lambda Microvalves for PDMS Chips

Research on an Off-Chip Microvalve for Pneumatic Control in Microfluidic Chips

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

Theoretical and Experimental Studies of a PDMS Pneumatic Microactuator for Microfluidic Systems

A Simple-Fabricated Passive Microvalve Using Rapid Prototyping of Glass and PDMS(polydimethylsiloxane)

Energy-saving, High-Pressure Resistant Mini Valve Based on a Bistable Electromagnetic Actuator

An electromagnetic microvalve for pneumatic control of microfluidic systems.

Dynamic Characteristics of a Novel PDMS Electromagnetic Microvalve

Disposable Pdms Diaphragm Micropump Actuated by Pzt

Experimental Study on a Polydimethylsiloxane (PDMS) Valveless Micropump Actuated by a Laser-induced Shock Wave

Controlling flow in microfluidic channels with a manually actuated pin valve

Membrane-based Valves and Inward-Pumping System for Centrifugal Microfluidic Platforms

Design and Research of the One-Way Microsphere Valve and the PDMS Film Electromagnetic Micropump

Study on Functionality and Surface Modification of a Stair-Step Liquid-Triggered Valve for On-Chip Flow Control

A Positive Pressure-Driven PDMS Pump for Fluid Handling in Microfluidic Chips

Design, Fabrication, and Characterization of A Valveless Magnetic Travelling-Wave Micropump