Abstract:Electroless nickel–phosphorus (Ni–P)-plated mold for hot press of optical lens must be manufactured to nanolevel surface roughness. The single-crystal diamond turning (SCDT) process is generally used to machine the Ni–P plating layer to attain the required form and ultrafine surface finish. However, this process frequently causes concentrically arranged tool marks to appear on the work surface. In this study, the Ni–P plating layer was polished with magnetic compound fluid (MCF) slurry to remove the tool marks. Two MCF slurries were used, one containing high-quality carbonyl iron particles (CIPs) and alumina (Al2O3) abrasive particles (1 µm), and the other containing CIPs coated with zirconia (ZrO2) abrasive particles (50–100 nm). First, spot polishing without relative motion between the center of the MCF carrier and the workpiece was carried out using both slurries. Then, scanning polishing with the MCF carrier moving along a motion path was carried out using only the MCF slurry containing ZrO2-coated CIPs. Although both slurries removed the SCDT-induced tool marks on the work surface, the MCF slurry containing relatively large Al2O3 abrasive particles left scratches and frequently caused CIPs to be embedded in the Ni–P plating surface, which inversely worsened the work surface roughness. In contrast, the MCF slurry containing relatively small ZrO2 abrasive particles resulted in an improved work surface roughness, without scratches or the embedding of particles. The cross-sectional profile of the polishing spot manifests a characteristic symmetrical W-shape. The dot-shaped scratches were induced at the spot center, and the lengths of these scratches increase with the increase in the distance from the spot center. In scanning polishing, the W-shaped polishing spot moves along the designed scanning path and instantaneous overlapping occurs, which significantly improves the flatness of the Ni–P plating layer from 0.2 to 0.1 µm. In addition, almost all the particles can move relative to the work surface, and the surface finish of the Ni–P plating layer was improved, without scratches or the embedding of particles. The preliminary results show that the MCF polishing is applicable to the nanolevel finishing of soft magnetic materials.

Study of Ultra-Precision Polishing of Electroless Nickel Molding Dies

Ultraprecision Fabrication of Large Stamping Die of Wolter Mirror for an X-Ray Telescope by ELID Grinding

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Precision Polishing Techniques for Metal Molding Dies and Glass Forming Technology “Slumping Method”

Ultrafine Polishing of Electroless Nickel–Phosphorus-Plated Mold with Magnetic Compound Fluid Slurry

A High Efficiency and Precision Smoothing Polishing Method for NiP Coating of Metal Mirror

Microscale shaping and rounding of ridge arrays and star pattern features on nickel mould via electrochemical polishing

Precision machining of microstructures on electroless-plated NiP surface for molding glass components

A Precision Polishing Method for Wolter-I Type Optical Mandrel

Ultra-precision fabrication of a nickel-phosphorus layer on aluminum substrate by SPDT and MRF

High efficiency polishing of micro-structured NiP alloy using isotropic electrochemical etching for achieving sub-nanometer roughness

One-Point Nano-Grinding for Micro-Aspherical Glass Lens Mould

Precision shaping of nickel micro-mould features via electropolishing: Characterisation of electrolytes from strong to weak acids

Effect of tool geometry and cutting parameters on surface quality and chip morphology of amorphous electroless nickel-phosphorus alloy in ultra-precision turning

Full Aperture Super-Smooth Polishing and Surface Topology Evolution of the Mandrels for X-ray Optics Used in Extp Mission

Optimization of forward pulsed currents for combining the precision shaping and polishing of nickel micro mould tools to reduce demoulding defects

Effect of electrochemical polishing on surface quality of nickel-titanium shape memory alloy after milling

Sub-Nanometer Accuracy Combination Processing Technology for Nickel–Phosphorus Modified Surfaces Based on Aluminum Reflector Mirror

Precision Polishing of the Mandrel for X-Ray Grazing Incidence Mirrors in the Einstein Probe

Magnetorheological finishing of electroless nickel-phosphorus-plated mold for ultraprecision injection molding

Fundamental Investigation on Nano-Precision Surface Finishing of Electroless Ni–P-plated STAVAX Steel Using Magnetic Compound Fluid Slurry