Abstract:Abstract Precise tooling is vital for defect-free production of micro injection moulded (μ-IM) or hot-embossed products. The demoulding stage of such moulding and forming processes poses a serious challenge to the integrity of thin miniature features because of friction, adhesion, and thermal stresses. Typically, micro moulds involve geometrically textured patterns or features such as linear ridges, pillars, channels, and holes, the characteristic dimensions of which range from 10 to 300 μm. Realistically complex mould designs, containing precision micro features (enhanced fillet radius and positive draft angle) and high surface quality, are presented in this work. Electropolishing based on forward pulse currents (PC) has been used to shape and polish Ni micro moulds that contain sets of micron-scaled linear ridges and star patterns in order to ease the separation of moulded polymeric parts from the metallic mould during ejection and demoulding. The use of forward pulsed currents improved the mould design by increasing the fillet radii and draft angle while keeping the surface roughness low and maintaining a good surface shine. An optimization study of forward PC using a green solution of nickel sulfamate varied EP times (0–70 min) and duty cycles (40, 50, 60, and 70%) at a process conditions of 2.8 V, 50 °C, and 250 rpm. The best topographical and morphological changes were observed for a typical microfluidic channel ( w × h , 100 × 110 μm) with an EP time of 70 min and 50% duty cycle: fillet radius increased by 3.8 μm, draft angle by 3.3°, and the channel width reduced by 11.4% while surface roughness changed by 8.6% and surface shine improved by 48.9%. Experimental validation was performed using hot embossing wherein the electropolished Ni mould replicated the micro channels and star patterns in PMMA chips with notably fewer burrs, material pile up, and no feature distortion. Moreover, there was a reduction in the side wall roughness of micro channels in PDMS casting with electropolished Ni mould by 16%. Hence, this work presents a significant scientific contribution to improving the efficiency of micro mould tools and reduces the defects caused by friction and adhesion in replicated polymeric parts.

Magnetorheological finishing of electroless nickel-phosphorus-plated mold for ultraprecision injection molding

Incined Magnetorheological Finishing and Its Path Controlling

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Nano-Precision Processing of NiP Coating by Magnetorheological Finishing

Ultra-precision fabrication of a nickel-phosphorus layer on aluminum substrate by SPDT and MRF

Optimization of forward pulsed currents for combining the precision shaping and polishing of nickel micro mould tools to reduce demoulding defects

Precision machining of microstructures on electroless-plated NiP surface for molding glass components

Morphology characterization of polishing spot and process parameters optimization in magnetorheological finishing

A High Efficiency and Precision Smoothing Polishing Method for NiP Coating of Metal Mirror

Pulse current electroforming of Ni-PTFE nanocomposite mold insert with long-lifetime and anti-adhesive properties

Sub-Nanometer Accuracy Combination Processing Technology for Nickel–Phosphorus Modified Surfaces Based on Aluminum Reflector Mirror

High efficiency polishing of micro-structured NiP alloy using isotropic electrochemical etching for achieving sub-nanometer roughness

Electrochemical magnetorheological finishing for hard-to-machine functional materials with nanometer-scaled surface roughness

Annealed high-phosphorus electroless Ni–P coatings for producing molds for precision glass molding

Magnetorheological Finishing for Aspheric Surface with Nanometer Accuracy

Enhanced electroless Ni-P plating quality on binderless tungsten carbide by atmospheric pressure plasma pretreatment

An overview of magnetorheological polishing fluid applied in nano-finishing of components

Process optimization and finite element modeling in magnetorheological abrasive finishing of SS-316L with surface characterization

Investigation on the optimal ultra-precision machining of nitriding mold steel by in-situ laser assisted diamond cutting

A Hybrid-Electrochemical Magnetorheological (H-ECMR) Finishing Process for Surface Enhancement of Biomedical Implants

Microscale shaping and rounding of ridge arrays and star pattern features on nickel mould via electrochemical polishing