Abstract:TianQin is a planned Chinese space-based gravitational wave (GW) observatory with a frequency band of 10-4 to 1Hz. Optical telescopes are essential for the delivery of the measurement beam to support a precise distance measurement between pairs of proof masses. As the design is driven by the interferometric displacement sensitivity requirements, the stability control of optical path length (OPL) is extremely important beyond the traditional requirement of diffraction-limited imaging quality. In a telescope system, the recurring tilt-to-length (TTL) coupling noise arises from the OPL variation due to the wavefront deformation and angular misalignment. The pupil aberrations are preferred option to understand the OPL specifications and further suppress TTL coupling noise. To correct the pupil aberrations, we derive primary pupil aberrations in a series expansion form, and then refine the formulation of merit function by combining the pupil aberration theory and traditional image aberration theory. The automatic correction of pupil aberrations is carried out by using the macro programming in the commercial optical software Zemax, leading to a high performance telescope design. The design results show that on one side the pupil aberrations have been corrected, and on the other side, its optical performance meets the requirements for TianQin project. The RMS wavefront error over the science field of view (FOV) is less than {\lambda}/200 and the maximum TTL coupling noise over the entire 300 urad FOV is 0.0034nm/urad. We believe that our design approach can be a good guide for the space telescope design in any other space-based GW detection project, as well as other similar optical systems.

Design of Pupil Off-Axis Space Telescope with Freeform Surfaces Based on the Nodal Aberration Theory

Design of reflective lens with Zernike polynomial free form surfaces

Calculation of Aberration Fields for Freeform Imaging Systems Using Field-Dependent Footprints on Local Tangent Planes.

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Design of a Large Field of View and Low-Distortion Off-Axis Optical System Based on a Free-Form Surface

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Design of a Panoramic Annular Lens with a Horizontal Symmetric FOV

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design of a Panoramic Annular Lens System with an Ultra-Wide Angle Via an Annular Gaussian Radial Basis Function Freeform Surface.

A Design Method of the Distortionless Catadioptric Panoramic Imaging Based on Freeform Surface

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Application of Freeform Surfaces in Designing Off-axis Reflective Space Optical Imaging Systems

Design Method for Freeform Off-Axis Three-Mirror Anastigmat Optical Systems with a Large Field of View and Low Error Sensitivity

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Starting Configuration Design Method of Freeform Imaging and Afocal Systems with A Real Exit Pupil

Pupil aberrations correction of the afocal telescope for the TianQin project

Analysis and experiment of polarization characteristics of Off-axis freeform optical system

Design of a high throughput telescope based on scanning off-axis Three-Mirror Anastigmat system

Freeform lens for off-axis illumination in optical lithography system

Construction of freeform mirrors for an off-axis telecentric scanning system through multiple surfaces expansion and mixing

Design of tilted and decentered anamorphic optical system based on nodal aberration control