Abstract:With the growing consumer demand in the electronics field, sustainable and effective cooling approaches are imperative to maximize operational efficiency. Heat pipes shave a major consideration in the field of heat transfer in a modern era of miniaturization of equipment. In current trends, the proportion of custom-designed electronic chips is increasing, given the space constraints of the application. Additionally, the use of nanofluids in heat pipes has drawn considerable attention because of their exceptional performance in heat transfer. This research is proposed primarily to investigate the effect of nanofluids on the performance of the partially flattened heat pipe. Here, the evaporator portion forms flat shape which is mostly suitable for fixing easily in electronic circuits. The remaining portions, such as the adiabatic and condenser, are left as circular. This work also covers the development of flattened heat pipes and analyzes their performance. Pure water, Titanium Oxide (TiO2), and Aluminum Oxide (Al2O3)-water-based nanofluids have been used in this research as working fluids. The heat transfer analysis on the customized partially flattened heat pipe was performed, and the results have been compared with fully flattened and circular heat pipes. The heat transfer parameters, such as the heat transfer coefficient and thermal resistance, have been determined from the heat input, evaporator temperature, and condenser temperature for various inclination angles including 0°, 45°, and 90° with the heat input varied between 50–300 W. The results have shown that the flattened heat pipe performed better with Al2O3 nanofluid at an inclination angle of 45° at all of the heat inputs and provided better thermal resistance compared with the other combinations. At 45°, the resistance of the heat pipe was reduced by 2% and 8% with Al2O3 nanofluid compared with water and TiO2 nanofluid. Furthermore, the heat transfer coefficient was found higher by 4 W/m2-K and 4.6 W/m2-K with Al2O3 and gives better results in terms of resistance and heat transfer coefficient.

Heat Transfer and Nanofluids Flow Through the Circular Concentric Heat Pipes: a Comparative Study Using Least Square Method (LSM)

Friction Factor And Heat Transfer Of Nanofluids Containing Cylindrical Nanoparticles In Laminar Pipe Flow

Numerical investigation of nanofluid laminar forced convection heat transfer between two horizontal concentric cylinders in the presence of porous medium

Heat transfer assessment of turbulent nanofluid flow in a circular pipe fitted with elliptical-cut twisted tape inserts

A Computational Fluid Dynamics Study of Laminar Forced Convection Improvement of a Non-Newtonian Hybrid Nanofluid within an Annular Pipe in Porous Media

Two-phase nanofluid condensation and heat transfer modeling using least square method (LSM) for industrial applications

Numerical Investigation of Nanofluid Convection Performance in the Fully Developed Flow Regime of the Pipe with Constant Wall Temperature

Numerical Heat Transfer Enhancement Using Different Nanofluids Flow Through Venturi and Wavy Tubes

Laminar Mixed Convection Heat Transfer Analysis in Horizontal Annuli using Hybrid Nanofluid

EXPERIMENTAL STUDY ON IMPROVING HEAT TRANSFER ABILITY OF A HEAT PIPE UTILIZING IRON OXIDE-FERRIC OXIDE HYBRID AND NICKEL FERRITE MONO-MAGNETIC NANOFLUIDS

Heat transfer enhancement by natural convection in a partially porous annular space between two coaxial cylinders saturated by Cu–water nanofluid

Heat transfer inside annular passages: A comparison of non-circular and fully circular passages using eco-friendly graphene nanofluid

Investigation of Nanofluid Heat Transfer in a Microchannel Under Magnetic Field Via Lattice Boltzmann Method: Effects of Surface Hydrophobicity, Viscous Dissipation, and Joule Heating

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Energy Analysis of Flattened Heat Pipe with Nanofluids for Sustainable Electronic Cooling Applications

Numerical Investigation on Thermal Performance of Nanofluid-Assisted Wickless Heat Pipes for Electronic Thermal Management

Effects of using nanofluids on thermal performance and mass transfer in a micro-flat plate heat pipe

Analysis of mixed convective-radiative heat transfer in a porous square cavity filled with various nanofluids

The Role of Heater Size and Location in Modulating Natural Convection Behavior in Cu-Water Nanofluid-Loaded Square Enclosures

Numerical analysis of heat transfer and friction drag relating to the effect of Joule heating, viscous dissipation and heat generation/absorption in aligned MHD slip flow of a nanofluid

Numerical Study of Heat Transfer Enhancement by Applying Magnetic Field on Nanofluid Flowing in Porous Medium