Abstract:The heat transmission capabilities of hybrid nanofluids are superior to those of mono nanofluids. In addition to solar collectors and military equipment, they may be found in a number of areas including heat exchanger, automotive industry, transformer cooling and electronic cooling. The purpose of this study was to evaluate the significance of the higher order chemical reaction parameter on the radiative flow of hybrid nanofluid (polyethylene glycol (PEG)–water combination: base fluid and zirconium dioxide, magnesium oxide: ticles) via a curved shrinking sheet with viscous dissipation. Flow-driven equations were transformed into nonlinear ODEs using appropriate similarity transmutations, and then solved using the bvp4c solver (MATLAB built-in function). The results of two scenarios, PEG − Water + ZrO2 + MgO (hybrid nanofluid) and PEG − Water + ZrO2 , (nanofluid) are reported. In order to draw important inferences about physical features, such as heat transfer rate, a correlation coefficient was used. The main findings of this study were that curvature parameter lowers fluid velocity, and Eckert number increases the temperature of fluid. It was observed that the volume fraction of ticles enhances the skin friction coefficient and curvature parameter lessens the same. It was noticed that when curvature parameter (K) takes input in the range 0.5 ≤ K ≤ 2.5, the skin friction coefficient decreases at a rate of 1.46633 (i.e., 146.633%) (in the case of hybrid nanofluid) and 1.11236 (i.e., 111.236%) (in the case of nanofluid) per unit value of curvature parameter. Increasing rates in the skin friction parameter were 3.481179 (i.e., 348.1179%) (in the case of hybrid nanofluid) and 2.745679 (in the case of nanofluid) when the volume fraction of nanoparticle (Φ1) takes input in the range 0 ≤ Φ1 ≤ 0.2. It was detected that, when Eckert number (Eck) increases, Nusselt number decreases. The decrement rates were observed as 1.41148 (i.e., 141.148%) (in the case of hybrid nanofluid) and 1.15337 (i.e., 153.337%) (in the case of nanofluid) when Eckert number takes input in the range 0 ≤ Eck ≤ 0.2. In case of hybrid nanofluid, it was discovered that the mass transfer rate increases at a rate of 1.497214 (i.e., 149.7214%) when chemical reaction (Kr) takes input in the range 0 ≤ Kr ≤ 0.2. In addition, we checked our findings against those of other researchers and discovered a respectable degree of agreement.

Analysis of mixed convective-radiative heat transfer in a porous square cavity filled with various nanofluids

Comparative analysis of heat transfer studies on a tilted porous rectangular enclosure filled with nanofluids by considering the impacts of the magnetic field and heat sink or source

Computational analysis of magnetohydrodynamic ternary-hybrid nanofluid flow and heat transfer inside a porous cavity with shape effects

Two-phase analysis of heat transfer of nanofluid flow in a cavity in the presence of a magnetic field, heating element, and a porous medium: A numerical approach

A numerical simulation of natural convection in a porous enclosure with nanofluid

Thermal analysis and optimization approach for ternary nanofluid flow in a novel porous cavity by considering nanoparticle shape factor

Numerical investigation of multiphase flow effects on mixed convection in partially heated hybrid nanofluid-filled cavity

Effect of Nanoparticles and Base Fluid Types on Natural Convection in a Three-Dimensional Cubic Enclosure

Finite element analysis of natural convective heat transfer in a porous square cavity filled with nanofluids in the presence of thermal radiation

Heat transfer analysis on micropolar alumina–silica–water nanofluid flow in an inclined square cavity with inclined magnetic field and radiation effect

Simulation of Dissipative Hybrid Nanofluid (PEG-Water + ZrO2 + MgO) Flow by a Curved Shrinking Sheet with Thermal Radiation and Higher Order Chemical Reaction

Mixed Convection in a Double Lid-Driven Cavity Filled with Hybrid Nanofluid by Using Finite Volume Method

Heat transfer enhancement by natural convection in a partially porous annular space between two coaxial cylinders saturated by Cu–water nanofluid

Heat generation/absorption effect on natural convective heat transfer in a wavy triangular cavity filled with nanofluid

Laminar Mixed Convection Heat Transfer Analysis in Horizontal Annuli using Hybrid Nanofluid

Heat transfer study and optimization of nanofluid triangular cavity with a pentagonal barrier by finite element approach and RSM

Review of Heat Transfer Analysis in Different Cavity Geometries with and without Nanofluids

MHD mixed convection heat transfer of copper water nanofluid in an inclined porous cavity having isothermal solid block

Heat Transfer Enhancement and Flow Characteristics Past Trapezoidal Bluff Body Embedded in Unconfined Cavity Filled with Nanofluid

Mixed convection heat transfer in a partial porous layered split lid-driven wavy wall cavity with Cu–H2O nanofluid

Heat transfer analysis of hybrid nanofluid flow with thermal radiation through a stretching sheet: A comparative study