Abstract:Ubiquitous computing has enabled the proliferation of low-cost solutions for capturing information about the user's environment or biometric parameters. In this sense, the do-it-yourself (DIY) approach to build new low-cost systems or verify the correspondence of low-cost systems compared to professional devices allows the spread of application possibilities. Following this trend, the authors aim to present a complete DIY and replicable procedure to evaluate the performance of a low-cost video luminance meter consisting of a Raspberry Pi and a camera module. The method initially consists of designing and developing a LED panel and a light cube that serves as reference illuminance sources. The luminance distribution along the two reference light sources is determined using a Konica Minolta luminance meter. With this approach, it is possible to identify an area for each light source with an almost equal luminance value. By applying a frame that covers part of the panel and shows only the area with nearly homogeneous luminance values and applying the two systems in a dark space in front of the low-cost video luminance meter mounted on a professional reference camera photometer LMK mobile air, it is possible to check the discrepancy in luminance values between the low-cost and professional systems when pointing different homogeneous light sources. In doing so, we primarily consider the peripheral shading effect, better known as the vignetting effect. We then differentiate the correction factor S of the Radiance Pcomb function to better match the luminance values of the low-cost system to the professional device. We also introduce an algorithm to differentiate the S factor depending on the light source. In general, the DIY calibration process described in the paper is time-consuming. However, the subsequent applications in various real-life scenarios allow us to verify the satisfactory performance of the low-cost system in terms of luminance mapping and glare evaluation compared to a professional device.

2d Spectral And Luminance Measurement Device

Display Measurement Using Imaging Color Luminance Meter and Its Uncertainty

CCD-based system for two-dimensional measurement of color uniformity of LCD projector

Sky Quality Meter measurements in a colour changing world

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

A Novel Method to Simultaneously Measure the Straightness

Stray light errors in spectral colour measurement and two rejection methods

Two-Dimensional Pixel-Level Photometric and Colorimetric Mass-Distribution Measurement of Micro-Displays

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Measurement of Led Spatial Intensity Distribution Using Imaging

Lighting Deviation Correction for Integrating-Sphere Multispectral Imaging Systems.

Measurement and error analysis on color uniformity of LCD projector

Measuring surface light source luminance by using digital imaging device

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

3-Dimensional Sensing System For The Adverse Scattering Environment

A Practical Method to Measure Parameters of Lenticular-Lens Sheet for 3DLCD

Assessment of the Performance of a Portable, Low-Cost and Open-Source Device for Luminance Mapping through a DIY Approach for Massive Application from a Human-Centred Perspective

Self‐calibration Three‐dimensional Light Field Display Based on Scalable Multi‐lcds

Portable Instrument To Measure The Average Luminance Coefficient Of A Road Surface

Optomechanical Design and Application of Solar-Skylight Spectroradiometer

The New Process of Measuring Method for Luminance Contrast under Bright Room Condition