Abstract:We need batteries to get the best out of renewable energies and other low-carbon energy sources, and the most promising path forward is to invest in high-energy-density battery technologies. In this regard, lithium metal is the best candidate for the anode electrode as it is the lightest metal on earth and has the lowest electrochemical potential (-3.04 V vs. SHE). However, the challenge to overcome for mass commercializing lithium-metal batteries (LMB) is stabilizing the solid electrolyte interphase that naturally grows at the electrode-electrolyte interface to avoid uncontrolled reactions leading to lithium depletion. Since the successful introduction of lithium-ion batteries (LIB), it has been known that tuning of the SEI composition and morphology is fundamental to prolong the battery life span; a well-engineered SEI layer simultaneously serves as an electron barrier and favors Li+ ion conduction across it, ensuring proper battery performance. However, the engineering of the SEI layer in LMB is more complex than its counterpart LIB batteries, given that lithium metal is overwhelmingly more reactive than graphite and the overall Li+ ion current across it is orders of magnitude higher. The up-to-date knowledge on the SEI morphology indicates that inorganic phases produced upon the decomposition of lithium salts present in the electrolyte tends to grow dominantly buried within the SEI layer, acting as an intermediate between the surviving lithium metal and the outermost organic SEI phase grown after decomposition of solvent molecules. The effect of electrolyte additives and diluents is to tweak the SEI composition. The narrative built after years of experimentation tells that proper battery functioning depends heavily on the ability of the incoming Li+ ions to desolve near the SEI outermost layer without triggering further side reactions, penetrate the inner SEI, and deposit in the anode as reduced lithium. However, the intricacies of the elementary reactions and the stage where the reduction takes place still fall beyond detailed comprehension, even though the development of in situ and operando analytical techniques has brought us a level of understanding on the subject that was unimaginable a few decades ago. In this talk, we discuss the instrumental impact that multiscale modeling techniques have played in clarifying the elementary steps of the SEI formation on pristine lithium metal, providing a comprehensive understanding of the precursors formed in the early stages of Solid-Electrolyte Interphase (SEI) growth. For instance, density functional theory (DFT) calculations have revealed that electrolyte diluents, such as TTE, previously considered inert to lithium metal, actively modify the liquid electrolyte solvation structure by weakly interacting with Li+ ions. Additionally, these diluents decompose against lithium metal, releasing fluoride ions and inundating the SEI layer with LiF. Similarly, DFT-based molecular dynamics (MD) techniques, including ab initio (AIMD) and reactive classical molecular dynamics methods (ReaxFF MD, among others), have facilitated a picoseconds (ps) scale observation of the temporal evolution of these SEI precursors, propelling a mechanistic understanding of the dynamics of the SEI formation; it is now recognized that there is an initial and rapid electrolyte decomposition occurring within the first tens of picoseconds after contact with lithium metal, preceding a longer-scale mass transfer segregation process leading to the formation of a myriad of organic and inorganic microphases within the SEI structure. However, the accessible time and space windows to MD methods fall within few hundred ps, leaving out the study of the morphological aspects of the SEI over extended cycling. In this sense, we discuss through kinetic Monte Carlo (kMC) calculations the evolution of the SEI formation on lithium metal and confirm the critical role that dislocations and grain boundaries play in ensuring proper lithium plating and mobility within the SEI layer over cycling. We confirm that bulk lithium diffusion within the inorganic SEI microphases, such as LiF and Li 2 O, is significantly lower than lithium mobility across LiF/Li 2 O interfaces. We also discuss the impact of electrolyte tunning on SEI morphology and provide insights into developing an SEI formation strategy based on the electrolyte molecules electrochemical stability and their relative contents of heteroatom species, such as F and O, to seed in the SEI composition and morphology, which we believe could have a significant impact on the development of stable LMB batteries.

(Invited) Atomically-Informed Phase-field Modeling of Li and Mg Electrodeposition Morphologies

Phase-field Simulation of Magnesium-Metal Anode Interface Growth in Different Electrolytes During Electrodeposition

Phase field modeling of dendrite growth mechanism of Mg and Li in electrodeposition

Morphology evolution of electrodeposited lithium on metal substrates

Quantitative Phase Field Modeling of Li Dendrite Growth

Three-dimensional experimental-scale phase-field modelling of dendrite formation in rechargeable lithium-metal batteries

Three-dimensional experimental-scale phase-field modeling of dendrite formation in rechargeable lithium-metal batteries

A continuum, computational study of morphogenesis in lithium intermetallic interfaces

Phase-field simulation tending to depict practical electrodeposition process in lithium-based batteries

Phase-Field Modeling of Dendrite Growth in Lithium Electrodeposition Process in Lithium Metal Batteries

Nonlinear Phase-Field Modeling of Lithium Dendritic Growth during Electrodeposition

Phase-Field Simulations of Lithium Dendrite Growth with Open-Source Software

Revealing the lithium dendrite deposition/dissolution progression based on Monte Carlo method

Electrochemical Atomic Force Microscopy Study on the Dynamic Evolution of Lithium Deposition

Modeling the Electro-Chemo-mechanical Failure at the Lithium-Solid Electrolyte Interface: Void Evolution and Lithium Penetration

Germanium accumulation byPseudomonas stutzeri AG259

Electro-chemo-mechanical behavior of lithium-ion battery electrodes

Dendrite formation in rechargeable lithium-metal batteries: Phase-field modeling using open-source finite element library

Mesoscopic modeling of Li insertion in phase-separating electrode materials: application to lithium iron phosphate

In situ AFM of interfacial evolution at magnesium metal anode

Unraveling the Dynamics of Solid-Electrolyte Interphase (SEI) Formation on Lithium Metal: Insights from Multiscale Modeling