Abstract:In recent years, due to the increase in the incidence of traffic accidents, the number of people with limb injuries has also increased. At the same time, among the aging population, neurological diseases or cardiovascular and cerebrovascular diseases have caused many people to have limb hemiplegia. It has been clinically proven that the use of rehabilitation equipment can help patients with limb injuries to restore limb motor function. This paper takes wearable lower limb rehabilitation exoskeleton as the research object, and its main contents are mechanical structure design, kinematics analysis, gait planning, virtual prototype simulation, and experimental verification and analysis. Based on the physiological characteristics of human body and the principle of comfortable and reliable wearing, this paper designs wearable exoskeleton for lower limb rehabilitation. Firstly, the physiological structure characteristics and movement mechanism of human lower limbs were studied and analyzed. By referring to the rotation range and height and size of each joint of human lower limbs, the overall scheme of wearable lower limb rehabilitation exoskeleton was designed and the degree of freedom was allocated. At the same time, Solidworks was used to establish a three-dimensional model. On the basis of a 3D model, a kinematics model was established, and the forward kinematics solution was obtained by using homogeneous coordinate transformation. Since the inverse kinematics solution was relatively complicated, the inverse kinematics solution was conducted in this paper according to the geometric relations of the joints of the lower limbs. Kinematics analysis of the exoskeleton structure of wearable lower limb rehabilitation was carried out to lay a theoretical foundation for gait planning. The off-line gait planning was carried out by using the method based on ZMP stability criterion, and the gait planning was divided into five stages: squat, start, middle step, stop and rise, and the motion trajectory of the center of mass and ankle joint was planned. Based on the inverse kinematics formula, the function of the change of joint angle with time in walking process is derived. The virtual prototype is established in ADAMS, and the simulation of virtual prototype is carried out by using the function of gait planning's joint angle and time. The correctness of structural design and gait planning was verified by measuring the trajectories of the centroid and ankle joints in each gait stage and the functional relationship between the rotation angle of each joint and time. Then, using a 3D dynamic capture system to capture the human lower limb motion trajectory of each joint, each joint trajectory data output, using the MATLAB software to output data, gets the joint trajectory change over time function curve and is used to verify feasibility and applicability of human gait planning. Through the research and analysis of the joints of the lower limbs of the human body, it can be concluded that the hip joint and the knee joint have 3 degrees of freedom, respectively, and the knee joint has 1 degree of freedom.

The Identification Method for the Lower Limb Posture Based on the Identification and Trace of Image

Human Posture Detection Method Based on Wearable Devices

Gait-Event-Based human intention recognition approach for lower limb

A Kinect-Based Motion Capture Method for Assessment of Lower Extremity Exoskeleton

Health Index Monitoring of Sports Injury Rehabilitation Training Based on Wearable Sensors

RGB-D Camera based Human Limb Movement Recognition and Tracking in Supine Positions.

Performance Evaluation Of Lower Limb Ambulatory Measurement Using Reduced Inertial Measurement Units And 3r Gait Model

Depth-aware pose estimation using deep learning for exoskeleton gait analysis

Measurement Method of Human Lower Limb Joint Range of Motion Through Human-Machine Interaction Based on Machine Vision

GaitTracker: 3D Skeletal Tracking for Gait Analysis Based on Inertial Measurement Units

The Wearable Lower Limb Rehabilitation Exoskeleton Kinematic Analysis and Simulation

Fall preventive gait trajectory planning of a lower limb rehabilitation exoskeleton based on capture point theory

Gait-stride-and-frequency-based human intention recognition approach and experimental verification on lower limb exoskeleton

A Potential-Real-Time Thigh Orientation Prediction Method Based on Two Shanks-Mounted IMUs and Its Clinical Application

Research on human gait prediction and recognition algorithm of lower limb-assisted exoskeleton robot

A wearable motion capture device able to detect dynamic motion of human limbs

A Low-Cost Inertial Measurement Unit Motion Capture System for Operation Posture Collection and Recognition

On the Kinematic Design of Anthropomorphic Lower Limb Exoskeletons and Their Matching Movement

Markerless gait analysis through a single camera and computer vision

Development of a Low-Cost and Portable Walker-Based Human Motion Estimation System

Research on a gait detection system and recognition algorithm for lower limb exoskeleton robot