Abstract:In the research of lower extremity exoskeleton, how to achieve synchronization between human and machine is quite significant. The intention recognition, which can be divided into three categories including EMG-based, EEG-based and biomechanics-based, is one of the effective implementation methods. In this paper, a new biomechanics-based method to realize the intention recognition is proposed. Compared with the mainstream, this method identifies the characteristic value of stride and frequency during walking, which describes human intention mathematically and concretizes the intention of human movement, improving the accuracy of recognition result and streamlining the algorithm. In addition, the impedance model is designed to further correct the recognition error. The main contents of this paper can be roughly summarized as follows. Gait feature event points are detected according to the angular signals of exoskeleton joints and the pressure signals of foot sole during the wearer’s walking process. Then the whole gait cycle is segmented by the identified gait feature event points, which is used to identify the wearer’s gait step and frequency in the gait cycle and output the trajectory transformed from standard gait trajectory by the recognized stride and frequency. Moreover, the interactive force signal collected by the three-dimensional force sensors mounted on the four-legged bar is provided as input to the designed impedance controller to adjust the transformed trajectory again. Also, the final trajectory is input to the Proportion Integral and Differential (PID) controller to realize the motion function of the lower extremity exoskeleton based on the wearer’s intention recognition result. Moreover, a simple hardware platform of lower limb exoskeleton is designed and built for practical experimental verification, which involves three kinds of gait respectively having constant stride, constant frequency and time-varying stride and frequency. The feasibility and reliability of the proposed algorithm can be concluded by analyzing the satisfactory experiment result.

Research on a gait detection system and recognition algorithm for lower limb exoskeleton robot

Gait Phase Recognition of Lower Limb Based on GA Optimized BP Neural Network

Research on human gait prediction and recognition algorithm of lower limb-assisted exoskeleton robot

Research on Lower Limb Step Speed Recognition Method Based on Electromyography.

An adaptive gait learning strategy for lower limb exoskeleton robot

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Gait-Event-Based human intention recognition approach for lower limb

Gait Recognition and Robust Autonomous Location Method of Exoskeleton Robot Based on Machine Learning

Gait phase recognition of lower limb exoskeleton system based on the integrated network model

Convolutional Neural Network Model for Gait Classification of Flexible Lower Limb Exoskeleton

Gait-stride-and-frequency-based human intention recognition approach and experimental verification on lower limb exoskeleton

The Application of Machine-Learning on Lower Limb Motion Analysis in Human Exoskeleton System

Design and analysis of a lower limb assistive exoskeleton robot

A laser-engraved wearable gait recognition sensor system for exoskeleton robots

Experiment Research of Human Lower Extremity Exoskeleton Robot

Depth-aware pose estimation using deep learning for exoskeleton gait analysis

Real-Time Gait Event Detection for a Lower Extremity Exoskeleton Robot by Infrared Distance Sensors

Walking Gait Classification Algorithm for Exoskeleton Robot on Unstructured Ground

Design and Control of a Lower Limb Rehabilitation Robot Based on Human Motion Intention Recognition with Multi-Source Sensor Information

Prediction of Lower Limb Exoskeleton Gait Trajectories Based on Plantar Pressure Information

Control strategy of the lower-limb exoskeleton based on the EMG signals